JDcrawlers Messageboard

Here are some pictures of the mess I got myself into, almost ready to paint now I will upload some more pictures that show full current form. http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10060/normal_image_16890113.JPG http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10060/no...

Sorry for no response I have them all back together but I have been delayed on the project. Had some personal business come up and had to deal with that. With that being said I’ve also run into some part’s issues, specifically the front idler’s, I thought mine were fine but they are not so just anot...

I would like to get the manual as well if anyone has one. Lanceandmakenzie28@gmail.com thank you ahead of time

So I have made a new set of rock guards for my machine and was wondering if there is any interest in others having them made for their machine. http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10060/normal_image_67188225~0.JPG http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/1006...

The problem I'm having is that you can not read the serial number on the machine.

Thanks for the reply. I ended up making a seal driver from pipe and got it in. Thanks for the help.

Ok so I'm convinced that I'm making this harder than it needs to be, however I would like to know that I'm on the right page before I put the tracks back on. So, the problem I'm having is when I disassembled the finals and put all new seals and bearings in one side had 8 fibers and 8 steels the othe...

Ok I'm having difficulty finding a part number or a specific tool for the 2-53 Detroit diesel rear main. I have tried to install a seal and had no luck, ruined the seal. Problem I'm having is I cant find one that is for the 2-53.

How much for the blower? And do you have a governor cover?

Just wondering if you were able to get the 6 way blade back up and going as I'm going through the same thing with a 6 way blade just a bit further than you have gone.

Ok, I now have 2 440icd crawlers and I'm going to try and make 1 good one and keep the parts from the other machine. One runs and moves but has no blade or carriage for a blade, however the one I just picked up has the hydraulic 6 way blade. Now with that being said I'm needing some advice/help with...