Search found 33 matches
- Mon Feb 09, 2015 5:30 pm
- Forum: Late model JD crawler technical support
- Topic: 3325 winch seems to be slipping.
- Replies: 0
- Views: 2150
3325 winch seems to be slipping.
Just got around to putting the (well used) winch on the 450c dozer. Removed clutches and cleaned them as they looked as if they had been packed with grease. Removed and cleaned brake band. Lots of oil in the compartment. All cleaned, dried and put back together. Brake hydraulics seem to be dry. Pres...
- Wed Feb 04, 2015 8:56 pm
- Forum: Late model JD crawler technical support
- Topic: 450c wants to turn right...
- Replies: 15
- Views: 12971
Thanks to you all for the advice. Fixed the problem with the hose going to the cutting clutches on the right side. Looks as if someone forgot to tighten the set screw on the clutch hub and almost cut the hose completely. Dozer runs like a champ now. Found a winch and now I'm working to get the bugs ...
- Sat Jan 31, 2015 10:21 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: looking for limb riser brackets...
- Replies: 1
- Views: 3099
- Wed Jan 28, 2015 8:47 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: looking for limb riser brackets...
- Replies: 1
- Views: 3099
looking for limb riser brackets...
Does anyone know where the bolt on brackets for the limb risers on the hard nose can be obtained?
- Sat Jan 24, 2015 8:22 pm
- Forum: Late model JD crawler technical support
- Topic: 450c wants to turn right...
- Replies: 15
- Views: 12971
- Sat Jan 24, 2015 7:39 pm
- Forum: Late model JD crawler technical support
- Topic: 450c wants to turn right...
- Replies: 15
- Views: 12971
Snow is flying so I put it in a warm garage. Talked to a local service manager that is supposed to be a whiz on the older machines. He also thinks it is something simple that is the problem. From just running enough to get into the garage, it has filled the final drive to overfull. Local guy seems t...
- Wed Jan 21, 2015 7:50 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 450c High Clearance Tree and Bush digger
- Replies: 2
- Views: 4360
450c High Clearance Tree and Bush digger
I saw this on fleabay and just thought it was interesting... First one I've seen.
http://www.ebay.com/itm/John-Deere-450- ... 35e40d29c6
http://www.ebay.com/itm/John-Deere-450- ... 35e40d29c6
- Wed Jan 21, 2015 6:52 pm
- Forum: Late model JD crawler technical support
- Topic: 450c wants to turn right...
- Replies: 15
- Views: 12971
BTW...thanks to all for the ideas and help.. Stan, I'm getting hyd pressure to the left side clutch as it is pulling good. I buried the blade and left side digs in good. Also, left brake works well. Right clutches and brake not working on right. Also, serial #201xxx so its a 1974. First year for 450...
- Wed Jan 21, 2015 6:46 pm
- Forum: Late model JD crawler technical support
- Topic: 450c wants to turn right...
- Replies: 15
- Views: 12971
- Tue Jan 20, 2015 10:44 pm
- Forum: Late model JD crawler technical support
- Topic: 450c wants to turn right...
- Replies: 15
- Views: 12971
- Mon Jan 19, 2015 9:07 pm
- Forum: Late model JD crawler technical support
- Topic: 450c wants to turn right...
- Replies: 15
- Views: 12971
I just bought this machine. It belonged to a local county school board. On the last day before retirement, 2 mechanics replaced the right side clutches and left before even checking to see if it was working. After finding out later that it didn't work, the county auctioned it off. Now I have it. Blo...
- Sun Jan 18, 2015 5:02 pm
- Forum: Late model JD crawler technical support
- Topic: 450c wants to turn right...
- Replies: 15
- Views: 12971
450c wants to turn right...
1974 450c dozer
After about 40-50ft going forward, it slowly starts turning right. Back up a couple feet and go forward another 40 feet and it does the same thing. Any ideas on what is causing this? Thanks...
After about 40-50ft going forward, it slowly starts turning right. Back up a couple feet and go forward another 40 feet and it does the same thing. Any ideas on what is causing this? Thanks...
- Sun Mar 03, 2013 5:15 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: guage
- Replies: 46
- Views: 48520
- Thu Feb 02, 2012 10:34 pm
- Forum: Late model JD crawler technical support
- Topic: 350D winch question.
- Replies: 7
- Views: 11054
Well... the winch is working... just barely. The brake will release if you pump the the control lever 2 or 3 times and you can empty the drum by hand. The brake will hold enough that I can drag the 350D with my backhoe. When I winch in, the drum turns almost 1/4 turn and stops. Release the control l...
- Tue Jan 31, 2012 10:51 pm
- Forum: Late model JD crawler technical support
- Topic: 350D winch question.
- Replies: 7
- Views: 11054
Jason... you were right. The cable end had came loose from the control valve. I hooked it up and the winch tightens up. Now for the next question. How do I get the winch to unwind? Should it freewheel off or does it power off. The winch on this machine was reported to have not worked in at least the...