JDcrawlers Messageboard

Thank you for all the information. With everything said and research done im going to call it a 350-B but I will make sure to try to identify part numbers on any parts I replace with the existing part. Thank you all for help.

Thanks lavoy, do you know if any b's had a powerstering pump and reservoir?

Also no leaking at a low idle,checked today leak starts at about 1500 rpm and will go away when idled back down.

Just verified it has a powerstering pump and reservoir on front of the engine. The reverser is located on the left arm rest and the ID plate was located by right foot and not the battery box. Would you all agree that I'm safe to assume it's a late model (70) straight 350? For the leak because it's c...

Went back over to the dozer today. Does anyone know where a serial number may be stamped in somewhere. No ID plates on the machine. Did talk to the previous owner, he is unsure what it is because he believed it was a 75 straight 350, but he is positive it has dry clutches which I believe narrows it ...

Do you by any chance know the part number for these seals? Trying to get my hands on a manual right now.

Definitely not engine oil. Its clean and not dark. Would that mean seals on the reverser are bad? Any idea if I should not run it till fixed.

Thanks again.

So I'm new to the dozer realm. I just bought a 75 straight 350 dozer. I'm currently learning about all the reverser problems that come with it. My problem is after running for 10-15 mins it starts leaking hydraulic oil out of a pin hole on bottom of the bellhouse. From what I've read there should be...