Search found 19 matches
- Thu Feb 09, 2023 2:10 pm
- Forum: Late model JD crawler technical support
- Topic: Soot in radiator, is it what I think?
- Replies: 2
- Views: 2979
Re: Soot in radiator, is it what I think?
Well this doesn't sound real good. Usually if it is a head gasket it will be blowing exhaust gases into the cooling system and then shows up in the radiator as bubbles and suit. It will also force your coolant out of the system. There are kits available for checking your coolant to see if exhaust g...
- Fri Oct 21, 2022 10:52 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: ISO Deere Nameplates
- Replies: 2
- Views: 11227
ISO Deere Nameplates
Need nameplates, mine are missing.
Part #AR 30424
Like pictured;
Part #AR 30424
Like pictured;
- Sun Oct 16, 2022 10:46 pm
- Forum: Late model JD crawler technical support
- Topic: Soot in radiator, is it what I think?
- Replies: 2
- Views: 2979
Soot in radiator, is it what I think?
450C, have been having to add a little coolant along, really hasn't had me too concerned but I've noticed what looks what I first thought grease but now I believe is soot that accumulate on the bottom of the radiator cap. Motor runs on the warm side of normal but starts instantly and seems to have p...
- Thu Oct 06, 2022 4:05 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C no crank
- Replies: 47
- Views: 15247
- Thu Oct 06, 2022 3:59 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C no crank
- Replies: 47
- Views: 15247
- Thu Oct 06, 2022 4:09 am
- Forum: Late model JD crawler technical support
- Topic: JD 450C no crank
- Replies: 47
- Views: 15247
Re: JD 450C no crank
When I bought my 450C the wiring was a mess, the previous owner had install a starter button “jumper” with 10ga. wire and a momentary single throw switch. I pulled all that out and hooked up the old starter button wiring. I then found I had similar issues to yours, intermittent starting. Long story ...
- Sat Sep 24, 2022 8:38 am
- Forum: Late model JD crawler technical support
- Topic: 450c wiring schematic
- Replies: 3
- Views: 2457
Re: 450c wiring schematic
Does your 450c have a voltmeter or ammeter?
Mine has an ammeter (yes, it is a real 450c) and couldn’t find a schematic anywhere. I found a schematic for a 450b was close but had different wire colors.
Mine has an ammeter (yes, it is a real 450c) and couldn’t find a schematic anywhere. I found a schematic for a 450b was close but had different wire colors.
- Sat Sep 17, 2022 12:40 pm
- Forum: Late model JD crawler technical support
- Topic: JD450C low range on HLR intermittent
- Replies: 2
- Views: 3083
Re: JD450C low range on HLR intermittent
ND Phack,
Did you get your low gear problem fixed? If so, what was the problem? My crawler is acting up in low gear.
Thanks!
Did you get your low gear problem fixed? If so, what was the problem? My crawler is acting up in low gear.
Thanks!
- Fri Sep 16, 2022 12:39 pm
- Forum: Late model JD crawler technical support
- Topic: Neutral Safety Switch (450C)
- Replies: 11
- Views: 4176
Re: Neutral Safety Switch (450C)
The repair;
80's GM car neutral safety switch $18. as opposed to $86. for JD OEM.
Car Quest SAA4615
Works perfectly
80's GM car neutral safety switch $18. as opposed to $86. for JD OEM.
Car Quest SAA4615
Works perfectly
- Fri Sep 16, 2022 9:38 am
- Forum: Show & Tell
- Topic: Ken's Krawler
- Replies: 3
- Views: 11662
- Fri Sep 16, 2022 9:11 am
- Forum: Late model JD crawler technical support
- Topic: Neutral Safety Switch (450C)
- Replies: 11
- Views: 4176
Re: Neutral Safety Switch Pigtail (450C)
My apologies, when I first found the switch (under the LH floor plate) it was covered in thick crud and I "assumed " it was like the starter switch.
- Fri Sep 16, 2022 9:05 am
- Forum: Show & Tell
- Topic: Ken's Krawler
- Replies: 3
- Views: 11662
Ken's Krawler
450C I purchased 8/2022
- Thu Sep 15, 2022 4:16 pm
- Forum: Late model JD crawler technical support
- Topic: Neutral Safety Switch (450C)
- Replies: 11
- Views: 4176
Re: Neutral Safety Switch Pigtail (450C)
Took it out, here is the NSSthe threaded end is 9/16"-18, 1 1/8" hex
Switch is bad, that's why previous owner had it bypassed. Still would like to find the right connector.
Switch is bad, that's why previous owner had it bypassed. Still would like to find the right connector.
- Wed Sep 14, 2022 10:42 pm
- Forum: Late model JD crawler technical support
- Topic: Neutral Safety Switch (450C)
- Replies: 11
- Views: 4176
- Tue Sep 13, 2022 6:21 pm
- Forum: Late model JD crawler technical support
- Topic: Neutral Safety Switch (450C)
- Replies: 11
- Views: 4176
Neutral Safety Switch (450C)
Can’t find a part number and I’m sure other applications use the same connector but the connector is missing and has been “straight wired” and readily starts in gear. I’d like to enable this safety for obvious reasons. Part number for the switch is AT14407. My best description of the terminals on th...