Search found 353 matches

by Howard Yoder
Mon Jan 11, 2016 3:49 pm
Forum: Early model JD crawler technical support
Topic: MC Drivetrain
Replies: 4
Views: 2571

You may find ice in it
by Howard Yoder
Thu Nov 19, 2015 10:44 am
Forum: Early model JD crawler technical support
Topic: 5 roller 420c track pads
Replies: 8
Views: 3488

Did you get them off a 440 or have they always been on there 440 1010 have an extra link if I remember correctly
by Howard Yoder
Fri Oct 23, 2015 12:19 pm
Forum: Early model JD crawler technical support
Topic: gearmatic winch fairleads
Replies: 4
Views: 2252

Sides are 2 3/4 x 15 middle one is 6 x 9 with a dip in the middle
by Howard Yoder
Thu Oct 22, 2015 9:54 am
Forum: Early model JD crawler technical support
Topic: 440cdi,gm, loader reverser adjustment
Replies: 4
Views: 2561

On a loader you probably don't have room or can see to use 2 screwdrivers you can reach in with your fingers push in the pin with 1 finger n turn the nut with the other cant remember every thing with out the book in front of me but I think it is more like 20 pounds of pressure and also for adjusting...
by Howard Yoder
Thu Oct 22, 2015 9:37 am
Forum: Early model JD crawler technical support
Topic: gearmatic winch fairleads
Replies: 4
Views: 2252

How far are you from Columbus oh you could come n look at one if your not to far
by Howard Yoder
Fri Sep 11, 2015 9:46 am
Forum: Lavoy's Little Shop O' Deeres
Topic: gearmatic 8a part
Replies: 11
Views: 6521

Have you tried paccar I got one off of them about 10 years ago
by Howard Yoder
Fri Jul 31, 2015 5:25 pm
Forum: Early model JD crawler technical support
Topic: Track adj
Replies: 3
Views: 2606

Track adj

What size wrench to adjust the tracks on 420 1 1/2 seems to big 1 3/8 to small I had one n lost it want to buy one tomorrow but want to get the right size is it a 1 7/16
by Howard Yoder
Fri Jul 10, 2015 4:37 pm
Forum: Early model JD crawler technical support
Topic: 440ICD Yard Find (New Member)
Replies: 12
Views: 5458

Let's face it it has been setting for a while unless it is 80 degrees out a small shot of either will probably be needed for it to start unless it has been recently rebuilt but if that was the case it wouldn't have been setting there if you can get the breather cap off put the throttle over about ha...
by Howard Yoder
Sun Jun 07, 2015 12:06 pm
Forum: Early model JD crawler technical support
Topic: Looking for info about this track pad.
Replies: 8
Views: 3915

Does anybody have any of those for sale
by Howard Yoder
Thu May 28, 2015 4:12 pm
Forum: Early model JD crawler technical support
Topic: 1 is good, 3 are better, 5? why not? An MC is coming home...
Replies: 17
Views: 7743

I believe it is a modified tool bar with the piece on the front has been welded on a tool bar that has been cut off but can't tell for sure in the picture
by Howard Yoder
Thu May 28, 2015 11:58 am
Forum: Early model JD crawler technical support
Topic: 1 is good, 3 are better, 5? why not? An MC is coming home...
Replies: 17
Views: 7743

Guess you would need my email address it is pcsaw@aol.com
by Howard Yoder
Thu May 28, 2015 11:56 am
Forum: Early model JD crawler technical support
Topic: 1 is good, 3 are better, 5? why not? An MC is coming home...
Replies: 17
Views: 7743

Tracts not rare just rare to find the pads in good shape there usually loose and flopping all around I could use them on one of mine the tool bar is there just been modified and there again it is hard to find one in good original condition they where made to pull 2 pins on either side pull out and t...
by Howard Yoder
Thu May 28, 2015 8:06 am
Forum: Early model JD crawler technical support
Topic: 1 is good, 3 are better, 5? why not? An MC is coming home...
Replies: 17
Views: 7743

Other than the tool bar every thing else looks original and in good shape almost impossible to find a set of tracts like that
by Howard Yoder
Fri Apr 17, 2015 8:25 am
Forum: Show & Tell
Topic: Saved another one.
Replies: 12
Views: 8555

Would like to get as many as possible ( John Deere ) at the Portland Indiana show in late August it is a really fun show
by Howard Yoder
Thu Apr 16, 2015 9:19 am
Forum: Show & Tell
Topic: Saved another one.
Replies: 12
Views: 8555

We had every thing from a BO lindemen to a 440 at our show I think there is pictures on here some where of it