Search found 353 matches
- Mon Jan 11, 2016 3:49 pm
- Forum: Early model JD crawler technical support
- Topic: MC Drivetrain
- Replies: 4
- Views: 4635
- Thu Nov 19, 2015 10:44 am
- Forum: Early model JD crawler technical support
- Topic: 5 roller 420c track pads
- Replies: 8
- Views: 7028
- Fri Oct 23, 2015 12:19 pm
- Forum: Early model JD crawler technical support
- Topic: gearmatic winch fairleads
- Replies: 4
- Views: 4354
- Thu Oct 22, 2015 9:54 am
- Forum: Early model JD crawler technical support
- Topic: 440cdi,gm, loader reverser adjustment
- Replies: 4
- Views: 4634
On a loader you probably don't have room or can see to use 2 screwdrivers you can reach in with your fingers push in the pin with 1 finger n turn the nut with the other cant remember every thing with out the book in front of me but I think it is more like 20 pounds of pressure and also for adjusting...
- Thu Oct 22, 2015 9:37 am
- Forum: Early model JD crawler technical support
- Topic: gearmatic winch fairleads
- Replies: 4
- Views: 4354
- Fri Sep 11, 2015 9:46 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: gearmatic 8a part
- Replies: 11
- Views: 10894
- Fri Jul 31, 2015 5:25 pm
- Forum: Early model JD crawler technical support
- Topic: Track adj
- Replies: 3
- Views: 4311
Track adj
What size wrench to adjust the tracks on 420 1 1/2 seems to big 1 3/8 to small I had one n lost it want to buy one tomorrow but want to get the right size is it a 1 7/16
- Fri Jul 10, 2015 4:37 pm
- Forum: Early model JD crawler technical support
- Topic: 440ICD Yard Find (New Member)
- Replies: 12
- Views: 10034
Let's face it it has been setting for a while unless it is 80 degrees out a small shot of either will probably be needed for it to start unless it has been recently rebuilt but if that was the case it wouldn't have been setting there if you can get the breather cap off put the throttle over about ha...
- Sun Jun 07, 2015 12:06 pm
- Forum: Early model JD crawler technical support
- Topic: Looking for info about this track pad.
- Replies: 8
- Views: 6924
- Thu May 28, 2015 4:12 pm
- Forum: Early model JD crawler technical support
- Topic: 1 is good, 3 are better, 5? why not? An MC is coming home...
- Replies: 17
- Views: 15770
- Thu May 28, 2015 11:58 am
- Forum: Early model JD crawler technical support
- Topic: 1 is good, 3 are better, 5? why not? An MC is coming home...
- Replies: 17
- Views: 15770
Guess you would need my email address it is pcsaw@aol.com
- Thu May 28, 2015 11:56 am
- Forum: Early model JD crawler technical support
- Topic: 1 is good, 3 are better, 5? why not? An MC is coming home...
- Replies: 17
- Views: 15770
Tracts not rare just rare to find the pads in good shape there usually loose and flopping all around I could use them on one of mine the tool bar is there just been modified and there again it is hard to find one in good original condition they where made to pull 2 pins on either side pull out and t...
- Thu May 28, 2015 8:06 am
- Forum: Early model JD crawler technical support
- Topic: 1 is good, 3 are better, 5? why not? An MC is coming home...
- Replies: 17
- Views: 15770
- Fri Apr 17, 2015 8:25 am
- Forum: Show & Tell
- Topic: Saved another one.
- Replies: 12
- Views: 15163
- Thu Apr 16, 2015 9:19 am
- Forum: Show & Tell
- Topic: Saved another one.
- Replies: 12
- Views: 15163