JDcrawlers Messageboard

Thank you!

Thank You Leonard,

I am picking it up from the dealers and attempting to do it myself. I have a Kubota bx 25 tractor with a frontend loader and hopefully it can lift the engine high enough. Any chance you know an approximate weight of the engine?
Chuck

I have a 350c jd dozer that needs work, i believe on the reverser. The dealer said 3 days ago, 25 hours to pull engine and reverser. Now he called and said the manual (not sure of its name) says its 22hours for the engine and 20 hours for the reverser. This seems totally off as I have done some work...

Thank You Thank You Thank you! There was a piece of the old bearing stopping it from seating! New ball in and pressure applied tapped with a hammer and presto! it broke loose.

Would it be foolish to weld the hole shut?

Itried it and it still has grease coming out the bottom hole. I even took the screw out again, use a little magnet to get the ball back out, to make sure every thing was in good shape and clean. Put the bb back in, tightened bolt and then nut... still comes out the bottom hole. Any ideas what to do ...

Thank you for the advice... I will try it and see if it works!

I have a 350C JD dozer with the track adjuster stuck. Tried pushing it in, no luck, so I took the adjuster off. I put the ball and screw back in... but the grease keeps coming out at the bottom hole. Do I keep putting grease in until it moves in place? Bolt should be tight? Help! lol