Search found 5 matches
- Thu Oct 06, 2022 10:07 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 C dozer track extender stuck
- Replies: 8
- Views: 3311
Re: JD 350 C dozer track extender stuck
Thank You Thank You Thank you! There was a piece of the old bearing stopping it from seating! New ball in and pressure applied tapped with a hammer and presto! it broke loose.
- Wed Oct 05, 2022 10:01 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 C dozer track extender stuck
- Replies: 8
- Views: 3311
Re: JD 350 C dozer track extender stuck
Would it be foolish to weld the hole shut?
- Wed Oct 05, 2022 9:58 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 C dozer track extender stuck
- Replies: 8
- Views: 3311
Re: JD 350 C dozer track extender stuck
Itried it and it still has grease coming out the bottom hole. I even took the screw out again, use a little magnet to get the ball back out, to make sure every thing was in good shape and clean. Put the bb back in, tightened bolt and then nut... still comes out the bottom hole. Any ideas what to do ...
- Wed Oct 05, 2022 9:31 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 C dozer track extender stuck
- Replies: 8
- Views: 3311
Re: JD 350 C dozer track extender stuck
Thank you for the advice... I will try it and see if it works!
- Mon Oct 03, 2022 10:54 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 C dozer track extender stuck
- Replies: 8
- Views: 3311
JD 350 C dozer track extender stuck
I have a 350C JD dozer with the track adjuster stuck. Tried pushing it in, no luck, so I took the adjuster off. I put the ball and screw back in... but the grease keeps coming out at the bottom hole. Do I keep putting grease in until it moves in place? Bolt should be tight? Help! lol