JDcrawlers Messageboard

I swap my oil cooler lines an got my steering pressure line on the pressure line an adjust the clutch valve I had perfect pressure dozer pulled good then I was pushing with it then I stopped an started back then transmission pressure started dropping at low ideal it got about 80psi an at full thrott...

I put new hose rated for oil some one said were ihad a rebuilt manifold for me to use 15-40 motor oil said the trans an hydraulic oil I was using was to thin an it was bypass the manifold rings

Yes it will which the dozer up hill I pull good I have my steering pressure line hooked up to the return line on the transmission I thought that might be my problem that it is not getting anuff pressure to engage how can I tell if my clutch adjustment is right the one that on the shaft coming out of...

That link show for a 450d would the oil line be the same

I have the oil cooler lines crossed do you think that would be my problem the which has the power to pull the dozer up hill

I have the oil cooler lines crossed do you think that would be my problem the which has the power to pull the dozer up hill

The transmission case was cracked hi did not work that's why I rebuilt it. Now it stops pulling whether I'm pushing or just traming when it's stops pulling oil pressure stayed the same 180 psi i can go back the next day an it will pull for about th same time an then stops i done clutch adjustment I ...

Rebuilt transmission everything new pulls an steer good for about 30 minutes then stops pulling still have good trans pressure 180 after it quits pulling I can take transmission oil filter off has very little oil comes out I need help I have a tech manual but it is no help to me

Pressure is about 180 did not change engine clutch whinch still work when it stops pulling thinking transmission oil cooler lines could be crossed need to know were they hook up which one is pressure line

Need to know which is pressure an which is return an were they hook up on radiator

I have rebuilt my transmission dozer pull good for 30-45 minutes then starts acting up and then quits pulling