I agree fix before more problems. I am thinking this will be a winter project.
Thanks.
Search found 5 matches
- Wed Jul 26, 2023 6:17 pm
- Forum: Early model JD crawler technical support
- Topic: MC grinding noise
- Replies: 10
- Views: 8916
- Mon Jul 24, 2023 7:51 pm
- Forum: Early model JD crawler technical support
- Topic: MC grinding noise
- Replies: 10
- Views: 8916
Re: MC grinding noise
Just pulled the trans cover... gears look very good and the front roller bearing on the input shaft looks good from what I can see. When I step on clutch I can hand spin the input drive shaft. I can feel and hear a bad spot. Everything is tight, what should I be looking for? I am thinking of running...
- Thu Jul 06, 2023 6:41 pm
- Forum: Early model JD crawler technical support
- Topic: MC grinding noise
- Replies: 10
- Views: 8916
Re: MC grinding noise
Sorry to hear that I might have to rebuild the trans.
I will pull the cover next as you suggested. I did change the trans oil and while empty I put in
a pick up magnet and 4 to 5 inches in there was no metal at all.
I will pull the cover next as you suggested. I did change the trans oil and while empty I put in
a pick up magnet and 4 to 5 inches in there was no metal at all.
- Sat Jul 01, 2023 8:04 am
- Forum: Early model JD crawler technical support
- Topic: MC grinding noise
- Replies: 10
- Views: 8916
Re: MC grinding noise
Yes it quits when clutch pushed in. I will check the procedure to repair.
Thank you.
Thank you.
- Tue Jun 27, 2023 4:49 pm
- Forum: Early model JD crawler technical support
- Topic: MC grinding noise
- Replies: 10
- Views: 8916
MC grinding noise
Hi, I am new here...just got a 1949 MC. Why I bought it I don't know but having fun working on it. Been doing normal maintenance all fluids and filters, checking for loose bolts, replacing track pad bolts that were loose. Runs good, starts right up no smoke, goes in to gear well and jumps when I rel...