JDcrawlers Messageboard

I also lost forward and reverse on my 555. I also had gauge in white and steering wasn't great at all. So I did as you did and pulled the suction screen out clogged except about 2"x3" cut out cleaned it off and out a d put it in the sonic cleaner for a bit and also changed the transmission filter un...

DC crump , I also lost forward and reverse on my 555. I also had gauge in white and steering wasn't great at all. So I did as you did and pulled the suction screen out clogged except about 2"x3" cut out cleaned it off and out a d put it in the sonic cleaner for a bit and also changed the transmissio...

Look for the simple first... May just be your shift linkage has come undone. Checked the linkage everything seems to be moving correctly and fast enough in and out. I did start it let it run and warm up to operating temperature, hydraulics are great, still no movement but I did notice as I was movi...

LeonardL wrote: ↑

Wed Jul 26, 2023 5:14 pm

Look for the simple first... May just be your shift linkage has come undone.

What would you do next?

Ok I check linkage and didn't see anything loose or disconnected. When I love the levers, it moves all the way into the two blocks on top of the transmission.

LeonardL wrote: ↑

Wed Jul 26, 2023 5:14 pm

Look for the simple first... May just be your shift linkage has come undone.

I will look at this first. Thank you I will let you know what I find.

So the shift linkage as in I can move the shifter to forward and reverse and see the linkage move under the floor pan. Also when I move to forward 1 and reverse1 the motor bogs down. I won't be back at the machine until Monday august 31 2023.

Hello all new to the site looked through about 26 pages and searched for good hydraulics good trans pressure. But, no movement. It's a highlift tracks. I started with the transmission filter and trans oil check. So what happened was I pushed some trash into a hole and back up to get a few more littl...