JDcrawlers Messageboard

i did get a good deal on a battery at tractor supply for about $90 and it is 950 CCA BUT its to big for the tray,DAH...this is why i`m a roofer!

i have a JD 1010c gas(4 cylinder) crawler can anyone tell me what size battery to get,thanks.

thanks Tigerhaze,maybe i can get my JD running this year if i can get all my fixes together before i start working on it.

that isn`t a deep cycle battery is it,thanks.

thank you Lavoy

i can`t find in the manual what size battery to use in my jd 1010 gas,i forgot to take it out of the dozer before winter and its at the cabin 120 miles away,thanks in advance for the help.about how many cold cranking amps would i need for the JD 1010-4 cylinder gas

Lavoy,on the schematics diagram it shows positive from coil to distributor,i did that and the negative wire goes to the starter switch witch has 4 connectors on it but i only have a 3 prong switch and it does have ignition on it witch the negative is hooked to.

i will copy and print everything that all you kind gentlemen have posted so when i return to camp i will give it your all,my jd1010 is 110 miles from where i live,we have a cabin near the central pa border and a home in niagara falls,if i could afford a trailer i would bring it home till it was fixe...

took cap off points are not sparking either.

there is a new negative wire going to the distributor from coil and a positive going from coil to resistor to key switch

put in rebuilt starter,new plugs wires,set points and condenser,ran new wires to coil,new wires to starter,voltage regulator and key switch which has only :battery-ignition-accessory,charged battery,put in new wico coil but distributor say prestolite on a tag on locking clip,ground is good,but i can...

this is a hard to find item:Wico used Deere # AT15611T which now subs to AT14385.ignition coil

thank you very much jdemaris,i am that close to getting her running again,i rebuilt the starter and for some reason theres no spark now.

does anyone know the part number for the coil on the JD 1010 12 volt,mine is not sending a spark to my plugs,and i forgot my parts book 110 miles away,or if there is a place on line that has schematics of the 1010,thanks.

thanks Randy