JDcrawlers Messageboard

Thanks for the info. Lavoy- could you send a pic of the adjuster you sell? Also- do you sell throw out bearings?

Thanks.

Does anyone sell the threaded steering adjuster for the 1010C or is it only available used?

The one I am referring to is located in the steering clutch housing and has a ball joint at each end.

Thanks.

Thanks for the suggestions. The radiator shop told me it needs new tanks and a new core for about $1200.

If there are no replacements out there, what about adding stop leak? Any downsides to giving that a try?

I need a radiator- what are my options?

This is for a gasoline crawler, no reverser, s/n 34617.

Thanks for any suggestions.

Thanks for replying.

No reverser on this one.

I will try putting the hydraulic fluid in and see what happens.

It is a gasoline - forgot to mention that. I am also thinking get it running and assess condition before getting too far in the weeds. Not sure what I may be getting into with steering and hydraulics. The last time I saw it run several years ago I think the steering was working. I did notice yesterd...

I have a 1010C that I am trying to resurrect. It has been sitting under a shed for several years. I have not tried to run the engine yet, just checking everything out first. Today I did a compression test. I got low numbers on two cylinders, so I squirted oil in each cylinder and redid the test. I p...

I hadn’t thought of that!

Thanks.

Thanks for the reply.

The reason I asked about the ground was I can’t figure out how the sending unit will work without a ground connection since the tank seems to be isolated from the tractor frame by the rubber tank mounts.

Any thoughts on that?

I am trying to get the fuel gauge working on my 1010. I think there should be a ground from the sending unit to the tractor frame, but mine is missing. Can anyone send a picture of how the ground was originally installed?

Thanks.