Thanks for the info. Lavoy- could you send a pic of the adjuster you sell? Also- do you sell throw out bearings?
Thanks.
Search found 11 matches
- Thu Mar 28, 2024 9:45 am
- Forum: Early model JD crawler technical support
- Topic: 1010 Steering adjuster
- Replies: 5
- Views: 8741
- Wed Mar 27, 2024 7:56 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 Steering adjuster
- Replies: 5
- Views: 8741
1010 Steering adjuster
Does anyone sell the threaded steering adjuster for the 1010C or is it only available used?
The one I am referring to is located in the steering clutch housing and has a ball joint at each end.
Thanks.
The one I am referring to is located in the steering clutch housing and has a ball joint at each end.
Thanks.
- Sat Jan 13, 2024 6:59 am
- Forum: Early model JD crawler technical support
- Topic: 1010C radiator
- Replies: 6
- Views: 8233
Re: 1010C radiator
Thanks for the suggestions. The radiator shop told me it needs new tanks and a new core for about $1200.
- Wed Jan 10, 2024 7:13 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C radiator
- Replies: 6
- Views: 8233
Re: 1010C radiator
If there are no replacements out there, what about adding stop leak? Any downsides to giving that a try?
- Tue Jan 09, 2024 2:56 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C radiator
- Replies: 6
- Views: 8233
1010C radiator
I need a radiator- what are my options?
This is for a gasoline crawler, no reverser, s/n 34617.
Thanks for any suggestions.
This is for a gasoline crawler, no reverser, s/n 34617.
Thanks for any suggestions.
- Sat Dec 02, 2023 11:46 am
- Forum: Early model JD crawler technical support
- Topic: 1010C Compression Test Results
- Replies: 4
- Views: 8519
Re: 1010C Compression Test Results
Thanks for replying.
No reverser on this one.
I will try putting the hydraulic fluid in and see what happens.
No reverser on this one.
I will try putting the hydraulic fluid in and see what happens.
- Sat Dec 02, 2023 9:00 am
- Forum: Early model JD crawler technical support
- Topic: 1010C Compression Test Results
- Replies: 4
- Views: 8519
Re: 1010C Compression Test Results
It is a gasoline - forgot to mention that. I am also thinking get it running and assess condition before getting too far in the weeds. Not sure what I may be getting into with steering and hydraulics. The last time I saw it run several years ago I think the steering was working. I did notice yesterd...
- Thu Nov 30, 2023 5:13 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C Compression Test Results
- Replies: 4
- Views: 8519
1010C Compression Test Results
I have a 1010C that I am trying to resurrect. It has been sitting under a shed for several years. I have not tried to run the engine yet, just checking everything out first. Today I did a compression test. I got low numbers on two cylinders, so I squirted oil in each cylinder and redid the test. I p...
- Sat Nov 25, 2023 9:30 am
- Forum: Early model JD crawler technical support
- Topic: 1010 fuel gauge ground
- Replies: 4
- Views: 7040
Re: 1010 fuel gauge ground
I hadn’t thought of that!
Thanks.
Thanks.
- Sat Nov 25, 2023 7:10 am
- Forum: Early model JD crawler technical support
- Topic: 1010 fuel gauge ground
- Replies: 4
- Views: 7040
Re: 1010 fuel gauge ground
Thanks for the reply.
The reason I asked about the ground was I can’t figure out how the sending unit will work without a ground connection since the tank seems to be isolated from the tractor frame by the rubber tank mounts.
Any thoughts on that?
The reason I asked about the ground was I can’t figure out how the sending unit will work without a ground connection since the tank seems to be isolated from the tractor frame by the rubber tank mounts.
Any thoughts on that?
- Fri Nov 24, 2023 4:49 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 fuel gauge ground
- Replies: 4
- Views: 7040
1010 fuel gauge ground
I am trying to get the fuel gauge working on my 1010. I think there should be a ground from the sending unit to the tractor frame, but mine is missing. Can anyone send a picture of how the ground was originally installed?
Thanks.
Thanks.