JDcrawlers Messageboard

i started to unbolt the sideplates and found some really tight bolts ,how did they get them so tight in 1959?:anyways ive taken out the pins on the cylinders and was wondering ,should i pull the lines off or can the side plates come off and the cylinders slide thru them?hope that i can get the plate...

After looking at it yesterday I realized I was wrong it has the weight braket on the back. If you can use it I would take $400 for it all it has a bucket on it and the controls in good shape. Howard is there any way you can email me pics? call me tomorrow i left my phone on my box at work 608 548 5...

will a40 420 3point hydraulic lift fit on a440ic?

I have an 831 loader with a backhoe attachment that I would sell you the hole unit then you would have all the parts you need Howard found the side plates in louisiana.although the heu sounds like a good idea do you have the parts th attatch it to my 440ic that was not equippid with the backhoe and...

need a pin for the knuckle an my bucket arm its the arn that goes down to the tractor i also broke the mount.any ideas to weld?it tates a lot of pressure there.

it is still possable that the leather packings fell apart and stuck in the filter or spool valve. is it possable to put a gauge on it or isolate a cylinder? ok my bucket quit on me and it was ruuing fine all weekend this is a440ic crawler with the pump up front in the grille ...anyways first i thou...

lavoy check into it and let me know if your friend still has the 3point imay as well get the best use out of my 440.thanks again the pump works great with the frustrations of taking it off 5 times i finally got to welding the spline shaft solid the coupling was worn out to the pump and i have the ot...

i been out in the yard. i welded the rollers and they work .. for now i just cant get the perfect yard, backgrading and want to attatch a 3point and blade dont know anyone on this website but lavoy.maybe he has what im looking for .tod

To rebuild the reverser, the entire center section must be removed from the crawler. The rear clutch pack is held in by a large nut between the reverser and trans. Lavoy i have a 440 ic and mine dont work either the handle is there but nothing else it would be cool to check this out when you take i...

now that i made a mess in my yard and broke it twice i need to find something to do to grade the dirt what works best ?box blade?cultivator?plow ?rock rake?if i put on a rear pto ,i can till?and i need to find out about attatching,3point.now ive got just the original weight plates.i looked at a 440i...

They're not made anymore. Murphy Tractor sells the 350 rollers on eBay with the 1/2" mounting holes for $135 a pop plus shipping. I'm sure Lavoy can help you out too. Lavoy, these would work on a 440 wouldn't they? Just not authentic. http://cgi.ebay.com/John-Deere-350-B-C-D-2010-400G-Bottom-Roller...

got the track back on .but i better change the rollers theyre #m2233t any ideas where i can find them?Tod

need 2 trak rollers john deere #m2233t . my track fell off and i observed a couple damaged rollers i tried to put the track back on myself and big prybar i need to get it over the front idler and i need to find 2 tarck idlers .will the crawler function for now or will it fall off again?Tod