Search found 17 matches
- Fri Jun 03, 2011 5:45 pm
- Forum: Early model JD crawler technical support
- Topic: steering clutchs
- Replies: 2
- Views: 3962
clutchs
thanks a lot for the info.
- Fri Jun 03, 2011 8:33 am
- Forum: Early model JD crawler technical support
- Topic: steering clutchs
- Replies: 2
- Views: 3962
steering clutchs
looking at a 440 crawler that does not run. how will i know if the steering clutchs are stuck? also will this render it incapable of moving untill they are free? like winching it onto a trailer? it has sat for quite a while, outside.
- Fri May 13, 2011 6:04 pm
- Forum: Early model JD crawler technical support
- Topic: 440 with a loader
- Replies: 1
- Views: 2755
440 with a loader
looking at a 440 with a diesel. been sitting for some time with the injectors out. they were rebuilt. the owner does not know how to time it. probably $1000 gets it. should i consider it or run? what kind of a job to get it running?
- Tue Jun 01, 2010 8:50 pm
- Forum: Early model JD crawler technical support
- Topic: diesel 440
- Replies: 1
- Views: 3004
diesel 440
what years did they make the diesel 440? also i have a chance to buy one the owner has rebuilt the injectors but are not in the motor.how had is it to to get running at that point? thank-you
- Wed Jan 06, 2010 9:55 pm
- Forum: Early model JD crawler technical support
- Topic: battery
- Replies: 5
- Views: 5615
battery
considering the starter, and cables are in good cond. what size amp. batt is recomended on the 440 crawler?
- Sat Dec 05, 2009 11:37 pm
- Forum: Early model JD crawler technical support
- Topic: starting
- Replies: 27
- Views: 21300
starting
on the 440 gase if i run 12 volts on the 6 volt starter will be hard on the bendix and maybe the flywheel because of the extra juice? thank for anyone that may have done that.
- Mon Feb 16, 2009 8:59 pm
- Forum: Early model JD crawler technical support
- Topic: 440 loader
- Replies: 1
- Views: 3341
440 loader
i have a 440 gas loader crawler, first what mite the total weight be? second is that loader hard on that model crawler?
- Mon Feb 16, 2009 8:57 pm
- Forum: Early model JD crawler technical support
- Topic: 440 crawler
- Replies: 1
- Views: 3040
440 crawler
if i convert 6v to 12v on the crawler will 12v kill the 6v starter, bendix or ringgear?
- Sun Mar 30, 2008 10:36 pm
- Forum: John Deere crawler FAQ's
- Topic: 440 crawler
- Replies: 1
- Views: 12786
440 crawler
could anyone tell me the weight of a 440 with a ft. end loader. there is no winch.? thank-you
- Tue Mar 25, 2008 8:13 am
- Forum: Early model JD crawler technical support
- Topic: 440 parts
- Replies: 1
- Views: 3118
440 parts
can anyone tell me what good used rollers and idlers for a 440 are worth each?
- Mon Mar 17, 2008 8:10 am
- Forum: Early model JD crawler technical support
- Topic: 440 loader crawler
- Replies: 1
- Views: 3340
440 loader crawler
i have just resealed the lift cylinders on my loader. they were shot. however the loader still creeps down , not as bad but still very anoying, any ideas?
- Mon Mar 17, 2008 8:07 am
- Forum: Early model JD crawler technical support
- Topic: 440 crawler
- Replies: 5
- Views: 6307
440 crawler
i have a 440 gas job, it has a winch, and blade. i am parting it out
- Mon Mar 17, 2008 8:04 am
- Forum: John Deere crawler FAQ's
- Topic: 440 gas
- Replies: 1
- Views: 11804
440 gas
i was wondering what the weight of a 440 gas with ft. end loader mite weigh?
- Mon Oct 29, 2007 7:53 pm
- Forum: Early model JD crawler technical support
- Topic: charging system
- Replies: 15
- Views: 15211
- Thu Oct 11, 2007 10:35 pm
- Forum: Early model JD crawler technical support
- Topic: charging system
- Replies: 15
- Views: 15211
charging system
either the generator or regulator are the culpret or both. is it wise to fix the problem or go to a 12 volt system? i plan on selling it.