JDcrawlers Messageboard

I'm looking for a used Brake Lever, JD P/N T23624 for my 350.

I know they are readily available new, but the price is too high for a hobby machine.

Anybody have one or know where I should look?

Thanks for the suggestion Jim.

I'll check it when it stops raining here

I just bought my second JD350. The transmisison took several quarts of JD 303 fluid to bring it to the FULL mark on the dipstick. When I moved it for the first time, a lot of fluid was blown out on the ground, and fluid no longer registers on the dipstick. Any ideas? (Especially any ideas that don't...

I need a used Brake Lever, JD P/N T23624 for my 350.

I know they are readily available new, but the price is too high for a hobby machine.

Anybody have one or know where I should look?

Does anyone have either experience or an opinion about using ordinary water pipe for parts of the hydraulic system? I have a two JD350 loaders, one with some steel lines remaining and the other with all steel lines replaced with hoses. The steel lines are exposed to accidental damage while working i...

My land is VERY steep, and I've had my first 350 run away on me multiple times, including once backwards.

That's an experience I never want to repeat

I'll do whatever it takes to get the foot brake working again.

I haven't looked close at the left side yet but I do see the rod (Item #18) moving in and out of the clutch housing. I suspect the rod is not adjusted correctly at the common shaft, thus allowing the pedal to "drop to the floor". I'll look at it closer on Monday. As for the linkage inside the clutch...

No wonder I couldn't find it! Who'da thunk you had to start with "transmission" to find "brake" :? After clearing out leaves and junk from the top of the clutch housing, I discovered that you can see the end of the brake rod below the steering clutch/brake linkage. The clevis on the end of my right ...

Thanks for the diagram - exactly what I was looking for. It looks like it's from the online parts catalog, but I never found it. I pulled up the floorboard and I can see item 10 and item 18 on the right side moving. I didn't pay attention to item 18 on the left side but will look again today. Item 1...

The other day I pushed really hard on the foot brake pedal. I heard a loud noise and the pedal dropped to the floor. As expected, the steering brakes still work, but I have no foot brake at all. The brake rod from the pedal to the clutch housing is intact, and moves when I move the foot brake pedal ...

Thanks for the advice - I'll know next time!

Thanks for your help. I don't have a physical parts book, so I search the online system. I guess I didn't search for the right thing.

My local JD dealer has one in stock which I'll pickup Wednesday.

Can anyone tell me the correct Part Number for the wire mesh suction line filter on a JD350 loader, and/or where I can buy one?

Mine's missing, so I can't just wash it in gasoline.

(Illustrated Parts List looks like it might be AT24274, but that looks like a paper filter from Google search)

I just bought my second John Deere 350 loader. When I started it for the first time, it ran for about 15 minutes, with normal raising, lowering and down-pressure on the boom. After about 15 minutes, the boom would not raise more than a few inches. I swapped the hydraulic pump (known good) from my fi...

I just bought a JD350 (straight) loader. Engine and undercarriage look good, but I have not been able to move it because the boom won't raise off the ground when I move the control lever. I suspect the hydraulic pump is not pumping, but I'm not sure how/why. With the disconnect lever horizontal, the...