JDcrawlers Messageboard

I didn't think of that, i did see a washer in the bottom of there when i was using the flash lite to take the pic. Hopefully getting that set is the only problem.

Thanks guys.

Dave

Cool that would be great, this one still turns with the pto but other then that i think i will have to tear it apart before i know how bad its gonna be.


Dave

Okay another try with a pic.

Hope this pic works.

While looking to adjust the clutch throw out on the right side of the crawler, the adjusting nut that your supposed to attach the 1/2" socket and speed handle to is completely missing. Is there any were i can get this bolt, or can i get a size and length for it.

Dave

Does anyone have any good pictures of the inside of an operational winch or even better a manual or parts list. I'm going to try and restore the winch on the 420 crawler i got last month. I know i'll be making parts as some are completed pooched.

Dave

You probly did these but: - retime - check gaps - plugs,points - check spark at plugs - if fuel is an issue make sure the feed line is running fuel nd that the sediment bowl is clean. - take the air cleaner off, so the carb is open to air - then MAKE SURE YOU HAVE GOOD FUEL, i mean this for two week...

Those are to cool, does JD import them at all.

I have several manuals but none show the throttle rod assembly, the one i have says to refer to the 40 manual. I am trying to figure out how the spring and washers all fit together on the end with the throttle handle.

Thanks

Dave

Muhhahahaha Its alive ALIVE Okay now that the melodramatics are over. I figured out what i did wrong and i think i might have to bash my head for not figuring it out earlier. It turned out to be bad gas. Thats it bad gas. :shock: Cleaned the carb, new plugs, new coil, new battery, rewired the igniti...

This starting to freak me out, i've fired all kinds of engines, and never had this happen. I must be overlooking something. I check the distributor, new coil, new battery, repaired bad wires, turns over fine. Just won't start, i'm gonna go buy new plugs tommorow. I've never had this happen before, w...

Yeah didn't think of that, plugs looked pretty new. I checked every thing else. I'm in Calgary at the tattoo show so i won't be able to work it out till Monday. Funny thing is it was running 100% drove it off the bed, played around for a bit, next day same thing, then i went into the yard and it jus...

Checked spark. Okay replaced coil just in case.

New battery, got power turns over fine.

Carb is working, or i may have too much gas as i played with the mix screw on the bottom of the carb.

So i have fuel have spark is there anything else that may have stopped it from running.

Dave

Yeah thats what I'm thinking. I'm gonna go through her today.

Dave

I just got a new 420 home from that states on monday and after running for about 15 minutes it died under load and has not started since, getting alot of fuel out the carb, its a zenith carb and the fuel is running out the bottom. I took the carb apart and checked the float and its working good, che...