Search found 93 matches

by mc_mike
Thu Aug 12, 2010 5:29 pm
Forum: Early model JD crawler technical support
Topic: John Deere model 1010 stops
Replies: 4
Views: 5850

hydraulic reverser?

I am assuming you have a reverser on this machine? Have you checked the fluid level?
by mc_mike
Mon Jul 26, 2010 6:38 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: John Deere 1010c Diesel - parting out
Replies: 4
Views: 4507

John Deere 1010c Diesel - parting out

I have a 1010 Diesel Crawler/Dozer with a bad engine, won't fire. Tracks need repinned as they are wore through, rail height doesn't look bad. Email with needs and offers. The gear shift is on the floor board and not on dash. Located in Green Springs, Ohio 44836. Can Email Pics of parts. Have manual...
by mc_mike
Tue Jul 20, 2010 7:02 pm
Forum: Late model JD crawler technical support
Topic: Engine Guards 450b fit 350c?
Replies: 1
Views: 1518

Engine Guards 450b fit 350c?

Just curious if anyone knows if the engine guards from a 450b would fit a 350c?
by mc_mike
Tue Jul 13, 2010 3:17 pm
Forum: Early model JD crawler technical support
Topic: 1010 crawler loader specs
Replies: 5
Views: 4987

1010 crawler loader specs

What does a diesel 1010 crawler loader weigh? What will it lift?
by mc_mike
Sat Jul 03, 2010 6:57 pm
Forum: John Deere crawler FAQ's
Topic: 1010 specs
Replies: 0
Views: 7758

1010 specs

Looking for the weight of a 1010 crawler with 6 way blade, and the weight of 1010 with loader. Also looking for the lifting capacity of the crawler loader. Thanks, Mike
by mc_mike
Sun May 02, 2010 2:05 pm
Forum: Early model JD crawler technical support
Topic: 1010 inside mount 6 way blade onto 440?
Replies: 4
Views: 2515

blade

Thanks for the info. Would any of the drive train swap with the 440? Final drives? Sprockets and chains do if I remember correctly.
by mc_mike
Sun May 02, 2010 6:30 am
Forum: Early model JD crawler technical support
Topic: 1010 inside mount 6 way blade onto 440?
Replies: 4
Views: 2515

1010 inside mount 6 way blade onto 440?

Considering buying a 1010 Dozer with 6 way power blade and was wondering if it would be a "bolt" on for a 440? It is the inside mount blade.

Thanks,
Mike
by mc_mike
Mon Apr 05, 2010 5:31 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: JD 350c Engine Side Guards Wanted
Replies: 1
Views: 1460

JD 350c Engine Side Guards Wanted

Looking for the right and left engine guards for 350c. Thanks.
by mc_mike
Sun Feb 14, 2010 6:23 pm
Forum: Late model JD crawler technical support
Topic: JD 350 track frame to front cross member gap?
Replies: 2
Views: 2934

JD 350 track frame to front cross member gap?

Working on my 350c getting ready to put the rollers on the track frame, there appears to be a gap of 1/8" from the front cross member to the track frame while jacked up. The bolts are tight and the bushings are there, am I missing something? Should I machine the bushings down and make this a tight f...
by mc_mike
Sun Feb 14, 2010 3:47 pm
Forum: Late model JD crawler technical support
Topic: Jd 350c track install
Replies: 7
Views: 9323

Jd 350c track install

Thought I would ask before I try this. I have a new track chain that I haven't put the pads on yet, and I was thinking of installing the master pin in the chain prior to putting the pads on, and also trying to install the chain on the crawler. Then install the pads. Anyone try this? I don't have a m...
by mc_mike
Mon Jan 11, 2010 6:03 pm
Forum: Late model JD crawler technical support
Topic: 350c Roller wear limits
Replies: 0
Views: 1296

350c Roller wear limits

Is there a gage or some way to measure roller wear on a 350C. I have seen roller wear gages for caterpillars never seen one for a JD. Anyone know what the offical specs are?
by mc_mike
Sun Dec 20, 2009 8:43 am
Forum: Late model JD crawler technical support
Topic: 350C Undercarriage Questions
Replies: 2
Views: 2462

350C Undercarriage Questions

I have a 350C Loader that is time do something with the undercarriage, the rail height looks good, but the bushings have holes wore in them. Should I buy new track chains or have the old repinned? If I buy new chains any brand to stay away from? I also am going to need a couple rollers, any brand to...
by mc_mike
Wed Oct 28, 2009 5:01 pm
Forum: Off-topic discussions
Topic: Specta Physics Laser ?
Replies: 1
Views: 2279

Specta Physics Laser ?

I am thinking about buying a spectra physics laser plane 350. Anybody have any experience with this brand of laser? Any idea on the specs? Should I stay away or is it a decent unit?

Thanks,
Mike
by mc_mike
Sun Apr 05, 2009 6:04 pm
Forum: John Deere crawler FAQ's
Topic: Serial number location 440ic
Replies: 2
Views: 8394

Serial number location 440ic

Where should the serial tag be for a 440 crawler? On the side of the bell housing like the 420/430? Or is it on the bottom of the console by the operators feet? Thanks for any help.

Mike
by mc_mike
Tue Aug 26, 2008 7:11 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: Wanted lindeman
Replies: 5
Views: 3505

lindeman

I would like to come take a look at it. Give me a call, I sent you a PM with my phone number. Let me know if you get it or not.

Thanks,
Mike