Search found 93 matches

by mc_mike
Sun Jan 14, 2007 3:22 pm
Forum: Early model JD crawler technical support
Topic: upper idler interchange question
Replies: 0
Views: 1838

upper idler interchange question

I have a 420 5 roller with the straight upper idler support. When I bought this basket case crawler it had 2 new upper rollers that came with it, along with the worn out ones that needed changed. The new parts have part number T14777T cast in the back of them, the old ones are too worn to see any nu...
by mc_mike
Mon Nov 27, 2006 11:47 am
Forum: Lavoy's Little Shop O' Deeres
Topic: Wanted Tracks for jd 420c 5 Roller
Replies: 2
Views: 2870

Wanted Tracks for jd 420c 5 Roller

Anybody have a set of tracks for a 5 roller 420? Preferably in the Ohio, Michigan area.

Thanks,
Mike
by mc_mike
Tue Nov 21, 2006 7:01 pm
Forum: Early model JD crawler technical support
Topic: 1010 track pad onto 350 rails
Replies: 1
Views: 2099

1010 track pad onto 350 rails

Will 1010 track pads fit on 350 rails?
by mc_mike
Mon Oct 09, 2006 6:50 pm
Forum: Early model JD crawler technical support
Topic: minimum thickness of 420 fiber plates
Replies: 4
Views: 2939

steering clutch thickness

My book says min thickness is .145, but I would think they would be useable below that if you could adjust the clutch fingers. Just my 2 cents.
by mc_mike
Sun Oct 01, 2006 6:41 am
Forum: Early model JD crawler technical support
Topic: JD 1010 c weight
Replies: 1
Views: 2064

JD 1010 c weight

Any idea what a 1010 gas crawler with a blade might weigh? I am considering buying one, and I have 2 trailers, a 7000lb and 15ton. I don't want to pull the larger one if I don't have too. The tracks are off the crawler and I could put them in the back of the truck and I think I would be okay with th...
by mc_mike
Sun Oct 01, 2006 6:17 am
Forum: Early model JD crawler technical support
Topic: JD 1010 tracks onto a 420
Replies: 2
Views: 2447

Thank you for the info, I thought so but before I took the plunge (spending th money) I wanted to know for sure.

Thanks again,
Mike
by mc_mike
Sat Sep 30, 2006 11:32 am
Forum: Early model JD crawler technical support
Topic: JD 1010 tracks onto a 420
Replies: 2
Views: 2447

JD 1010 tracks onto a 420

I asked some questions before about undercarriage interchange and I want to make sure I have this straight. If I want to swap 1010 tracks onto a 5 roller 420 they will fit the orginial sprockets or do I need the narrower offset sprocket? Will 1010 sprockets fit the final drives on a 420 if I need to...
by mc_mike
Wed Sep 13, 2006 6:10 pm
Forum: Early model JD crawler technical support
Topic: 420 final drive question
Replies: 2
Views: 2578

420 final drive question

I am redoing the final drives on my basket case 420 that I just had to buy and I have a question. When I got the crawler one final drive was in pcs, I have all new bearings, seals, etc. Now my question, on the axle shaft , the thrust washer that goes against the large gear, part number M1005T, was t...
by mc_mike
Wed Aug 30, 2006 7:29 pm
Forum: Early model JD crawler technical support
Topic: undercarriage interchange mc,40,420,430,440
Replies: 7
Views: 7775

Thanks

Thanks for all the info. I knew someone would have the answers.
by mc_mike
Wed Aug 30, 2006 7:28 pm
Forum: Early model JD crawler technical support
Topic: JD 1010 blade on to a JD420
Replies: 1
Views: 2071

JD 1010 blade on to a JD420

How much of a hassle would it be to adapt a JD 1010 dozer blade to a JD 420? Is anything a direct bolt on?

Thanks,
Mike
by mc_mike
Sun Aug 27, 2006 6:35 pm
Forum: Early model JD crawler technical support
Topic: undercarriage interchange mc,40,420,430,440
Replies: 7
Views: 7775

undercarriage interchange mc,40,420,430,440

Does the undercarriage from 40c through 440c interchange? I was told the mc is completely different? I was also told that certain 40 crawlers have a different offset sprocket, but the track and rollers would interchange with the 420, 430, 440? What is the difference between undercarrige on the 1010 ...
by mc_mike
Mon Aug 07, 2006 7:19 pm
Forum: John Deere crawler FAQ's
Topic: rail height for 420c
Replies: 1
Views: 6690

rail height for 420c

What is the rail height supposed to be on a jd 420 5 roller undercarriage?

Thanks,
Mike
by mc_mike
Fri Jul 21, 2006 10:10 am
Forum: Early model JD crawler technical support
Topic: JD 440C with 831 Loader Questions
Replies: 1
Views: 1938

JD 440C with 831 Loader Questions

Anyone know what the hyd pressure should be for a JD440C with the factory JD Loader? Also does anyone know the lifting capacity?

Thanks,
Mike
by mc_mike
Sun Jul 09, 2006 6:26 pm
Forum: Early model JD crawler technical support
Topic: Bushing for third speed driven gear on 5-speed.
Replies: 3
Views: 2444

bushing

Do you still need a bushing? I have a NOS one.
by mc_mike
Sun Jun 04, 2006 6:26 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: JD 420 Engine clutch
Replies: 0
Views: 1951

JD 420 Engine clutch

I noticed on your parts page you have an engine clutch kit. What does this contain? My serial number is 119424. I am redoing the tranny and have the whole crawler in pcs and thought I better check the clutch and low and behold the engine clutch disk was rusted/corroded fast to both the pressure plat...