Search found 2264 matches

by Tigerhaze
Mon May 23, 2016 12:10 pm
Forum: Late model JD crawler technical support
Topic: Backhoe Hydraulic Plumbing
Replies: 6
Views: 1435

You need to be very careful in what you do here to make sure you have the hydraulic lines hooked up the way they need to be, or at a minimum you could blow a pump and worst case someone could get hurt. The question you need to answer first is- do both the crawler and the hoe use the same flow system...
by Tigerhaze
Mon May 23, 2016 11:58 am
Forum: Late model JD crawler technical support
Topic: anyone know how to post a video
Replies: 1
Views: 702

You should be able to share it the same way as photos if using a sharing site like Photobucket, using the "url" function. That would provide a link for people to click on that would take you to the video at the location it is housed. I don't know that you would be able to use the "img" function and ...
by Tigerhaze
Fri May 20, 2016 2:53 pm
Forum: Late model JD crawler technical support
Topic: Diference btwn 450E and 450G?
Replies: 9
Views: 2479

Re: Diference btwn 450E and 450G?

Is there someplace I can go to see a side by side comparison between the two?. I can't answer that directly (although you could look at the spec sheets on the murphy Tractor website), but these threads also discuss differences. http://www.jdcrawlers.com/messageboard/viewtopic.php?t=6697&highlight=4...
by Tigerhaze
Thu May 19, 2016 4:39 pm
Forum: Late model JD crawler technical support
Topic: Backhoe Hydraulic Plumbing
Replies: 6
Views: 1435

I don't have the answer offhand, but have you looked at the free parts diagrams on JDParts?

http://jdpc.deere.com/jdpc/servlet/com. ... ervlet_Alt
by Tigerhaze
Mon May 16, 2016 5:30 pm
Forum: Late model JD crawler technical support
Topic: John Deere 450B steering throwout shaft and fork
Replies: 5
Views: 1372

NP, are you talking about General Gear and Machine in Boise? I tried to reach out to them for a part for an Allis Chalmers wheel loader and they wouldn't ever answer their phone or e-mails. Any tips?
by Tigerhaze
Mon May 16, 2016 9:26 am
Forum: Late model JD crawler technical support
Topic: Please help! Bad fuel injectors JD350b
Replies: 1
Views: 705

Re: Please help! Bad fuel injectors JD350b

I have fuel going to the injectors but nothing coming out of the return line. I believe the injectors are stuck or no good.? Thanks The return line for indirect injection systems comes from the injection pump, not the injectors. The return line should always have flow when running because it bypass...
by Tigerhaze
Thu May 12, 2016 5:24 pm
Forum: Late model JD crawler technical support
Topic: hlr tranmission help
Replies: 4
Views: 1523

These threads may be able to help you test- while we could speculate your pressures and other checks will help to diagnose:

http://www.jdcrawlers.com/messageboard/ ... ht=hlr+low
by Tigerhaze
Tue May 10, 2016 6:21 pm
Forum: Late model JD crawler technical support
Topic: Water in Tranny
Replies: 7
Views: 1569

Re: Water in Tranny/ hydraulic oil

Does anyone think that the power will come back to the drive train after that soaking of about 50 50 water and hydraulic fluid? Are you sure it is the HLR causing low power to the tracks or is it possible that your steering clutches are slipping? On a straight 450 the two systems are not connected ...
by Tigerhaze
Mon May 09, 2016 7:02 pm
Forum: Early model JD crawler technical support
Topic: Cessna Hydraulic Pump
Replies: 2
Views: 1128

You should read Jdemaris's posts on these Cessna pumps- if you are replacing them to solve a leak I think he would tell you it won't work and that these are "throwaway" pumps.

http://www.jdcrawlers.com/messageboard/ ... +throwaway
by Tigerhaze
Mon May 09, 2016 6:57 pm
Forum: Late model JD crawler technical support
Topic: Water in Tranny
Replies: 7
Views: 1569

Digitup2 had an idea a while back to use marine absorbents to remove water from transmission fluid- the only issue is if it is small enough to fit through the dipstick tube: http://www.jdcrawlers.com/messageboard/viewtopic.php?t=5686&highlight=water http://www.jdcrawlers.com/messageboard/viewtopic.p...
by Tigerhaze
Tue May 03, 2016 11:10 am
Forum: Early model JD crawler technical support
Topic: 1010 winch - all the same?
Replies: 19
Views: 5280

Thanks for the info - however I don't think electric is the right option for the use I'll have with the winch. Like Lavoy states "it'll be in a bunch of little pieces" if I go that route. Sure no problem- I was mainly resurrecting it for others that may not have read the original threads. There are...
by Tigerhaze
Tue May 03, 2016 11:07 am
Forum: Late model JD crawler technical support
Topic: Broken Front Idler
Replies: 20
Views: 3676

by Tigerhaze
Tue May 03, 2016 11:05 am
Forum: Show & Tell
Topic: There is nothing like a young girl and...
Replies: 13
Views: 5082

Those are the kinds of memories that kids don't ever forget. My sister in law wants to bring out my nephew who is 3 to come out and "drive" my 2010 crawler sometime. I can't wait to do that with him.
by Tigerhaze
Mon May 02, 2016 10:54 am
Forum: Early model JD crawler technical support
Topic: 1010 winch - all the same?
Replies: 19
Views: 5280

For $800.00, you can buy an electric winch. If you go that way, you'll probably want to convert to 12 volt system and use 2 batteries. This is a pretty good thread about electric vs. hydraulic winches; be sure to check out the links I embedded at the bottom of the thread. http://www.jdcrawlers.com/...
by Tigerhaze
Thu Apr 21, 2016 2:33 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: NOS 2010 front idler
Replies: 5
Views: 1972

I might be interested for my second 2010- will have to see when you get them in. I don't suppose you have run across any NOS late 2010 sprockets, have you? :wink: