Search found 747 matches
- Mon Apr 27, 2020 11:10 am
- Forum: Late model JD crawler technical support
- Topic: 450? Or 450b?
- Replies: 14
- Views: 8439
Re: 450? Or 450b?
Hello. Under the “Board Index” there is a tab “John Deere crawler FAQ’s”. If you click that section, there is a SN thread for 450’s. It is 2-3 threads down. It appears your machine is a 450 Straight. 1970. Steering clutches are dry. The plug you have described is most likely the final drive fill. Fo...
- Sun Apr 26, 2020 4:00 pm
- Forum: Late model JD crawler technical support
- Topic: 450 c 3325 winch
- Replies: 5
- Views: 5649
Re: 450 c 3325 winch
Hello Kyjimmy! First off, we need to find out if you have a spool or rotary valve. The spool valve will be mounted more under the seat and have a silver spool moving in and out of a casing with the cable control. The spool valve is a small square box, about 3”x3” mounted directly onto the winch hous...
- Wed Apr 22, 2020 8:09 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 3325 Winch gears & parts
- Replies: 3
- Views: 5576
Re: 3325 Winch gears & parts
FYI - 2010owner was last on this site 4/6/2020. Be patient, maybe send him a PM.
Do you have a part #? For the piece you need.
Do you have a part #? For the piece you need.
- Tue Apr 21, 2020 8:24 pm
- Forum: Late model JD crawler technical support
- Topic: Jd 3325 winch
- Replies: 2
- Views: 2234
Re: Jd 3325 winch
I would contact Lavoy (owner of this site). His contact info is listed at the “Lavoy’ Little Shop O’Deeres” section about 4-5 threads down from the top.
If he doesn’t have it try - http://www.j-kequipment.com/winch_parts.html
Best regards, Bruce
If he doesn’t have it try - http://www.j-kequipment.com/winch_parts.html
Best regards, Bruce
- Sat Apr 18, 2020 12:58 pm
- Forum: Late model JD crawler technical support
- Topic: Looking for 450 tool tray pictures or measurements
- Replies: 103
- Views: 70191
Re: Looking for 450 tool tray pictures or measurements
Hello oldmetalmender,
The straps and the board(plate) arrived. The package was in good shape. And the parts fit the wider battery box very well.
Thank you, Bruce
The straps and the board(plate) arrived. The package was in good shape. And the parts fit the wider battery box very well.
Thank you, Bruce
- Sat Apr 18, 2020 12:53 pm
- Forum: Late model JD crawler technical support
- Topic: 450 operators manual, anyone?
- Replies: 8
- Views: 6125
Re: 450 operators manual, anyone?
Hello kilohertz,
Wish I could help. I only have paper manuals. Loader or dozer?
Best regards, Bruce
Wish I could help. I only have paper manuals. Loader or dozer?
Best regards, Bruce
- Fri Apr 10, 2020 7:43 am
- Forum: Late model JD crawler technical support
- Topic: jd 3315 winch
- Replies: 3
- Views: 2628
Re: jd 3315 winch
Hello and welcome, Jdparts shows the following- 3315 winch. Part #9. Part number. AT 23837 https://partscatalog.deere.com/jdrc/sidebyside/equipment/62257/referrer/navigation/pgId/185553 And 3325 winch. Part #9. Part number AT33822 https://partscatalog.deere.com/jdrc/sidebyside/equipment/67823/referr...
- Tue Apr 07, 2020 11:37 am
- Forum: Late model JD crawler technical support
- Topic: 450-C Injection pump and timing questions
- Replies: 5
- Views: 3765
Re: 450-C Injection pump and timing questions
Welcome to the crawler board. Did you witness break down of the ring in the window? Mouse turds? I would look at the entire system before resigning to a IP rebuild. The check valve on the IP solenoid cover. The vent on the fuel tank. Fuel filters. Fuel supply from the tank. These all can cause simil...
- Tue Apr 07, 2020 11:28 am
- Forum: Early model JD crawler technical support
- Topic: Which is better 40c 0r 420c final drive housing
- Replies: 9
- Views: 7248
Re: Which is better 40c 0r 420c final drive housing
Yes, the gusseted final is the late 420 final drive housing.
- Tue Apr 07, 2020 4:59 am
- Forum: Off-topic discussions
- Topic: trailer connector problem
- Replies: 21
- Views: 17144
Re: trailer connector problem
I have heard the technician may need to turn the brake control module on with a computer, also. Gotta love new computer technology. I had a friend who had to have this programming done. $$$
- Sat Apr 04, 2020 5:26 pm
- Forum: Late model JD crawler technical support
- Topic: 450B problem
- Replies: 40
- Views: 24771
Re: 450B problem
Sounds like the engine may be pressurizing the cooling system. Do you have access to a radiator pressure tester? How did the water pump feel (while the radiator was out)?
- Mon Mar 30, 2020 7:01 pm
- Forum: Late model JD crawler technical support
- Topic: Looking for 450 tool tray pictures or measurements
- Replies: 103
- Views: 70191
Re: Looking for 450 tool tray pictures or measurements
Glad you are safe and healthy. I mailed your $$$ today, 3/30 from Western Iowa
- Mon Mar 30, 2020 6:59 pm
- Forum: Late model JD crawler technical support
- Topic: JD450C third head gasket This is getting old
- Replies: 168
- Views: 159212
Re: JD450C third head gasket This is getting old
Boat - Bust out another thousand
- Sun Mar 29, 2020 4:41 pm
- Forum: Late model JD crawler technical support
- Topic: Looking for 450 tool tray pictures or measurements
- Replies: 103
- Views: 70191
Re: Looking for 450 tool tray pictures or measurements
238,xxx SN track loader battery box measures 7 3/4”(where the battery is placed, measured inside to inside at the main battery switch.
313,xxx SN track dozer measures 8 1/16” at the location as measured above.
Hope this helps with future efforts, Bruce
313,xxx SN track dozer measures 8 1/16” at the location as measured above.
Hope this helps with future efforts, Bruce
- Sun Mar 29, 2020 1:44 pm
- Forum: Late model JD crawler technical support
- Topic: JD450C third head gasket This is getting old
- Replies: 168
- Views: 159212
Re: JD450C third head gasket This is getting old
Yes, the plastic cup dust collector. Not the dual paper filter elements.