Search found 10804 matches
- Sun Mar 11, 2007 7:58 pm
- Forum: Early model JD crawler technical support
- Topic: 440 IC Steering Clutch
- Replies: 8
- Views: 9390
Unless you like pulling final drives, replace them. I know I know, I sell clutch discs, but nonetheless, for the effort involved, it is not worth having to redo it. If they have been that wet, they are damaged at least to some extent. Picture hosting instructions are listed at the top of the show an...
- Sun Mar 11, 2007 7:56 pm
- Forum: Early model JD crawler technical support
- Topic: Cannot get steeering shaft out
- Replies: 3
- Views: 4081
- Sat Mar 10, 2007 9:41 pm
- Forum: Early model JD crawler technical support
- Topic: engine troubles
- Replies: 3
- Views: 4796
- Sat Mar 10, 2007 9:40 pm
- Forum: Early model JD crawler technical support
- Topic: Clutch Disks
- Replies: 3
- Views: 4600
- Fri Mar 09, 2007 4:53 pm
- Forum: Early model JD crawler technical support
- Topic: 420c Do I need a coil resistor?
- Replies: 2
- Views: 4343
- Thu Mar 08, 2007 8:56 pm
- Forum: Early model JD crawler technical support
- Topic: engine troubles
- Replies: 3
- Views: 4796
- Thu Mar 08, 2007 8:53 pm
- Forum: Early model JD crawler technical support
- Topic: 420 Block
- Replies: 1
- Views: 3062
- Tue Mar 06, 2007 10:38 pm
- Forum: Early model JD crawler technical support
- Topic: Backhoe
- Replies: 1
- Views: 2505
- Mon Mar 05, 2007 10:09 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Exhaust pipes back in stock
- Replies: 0
- Views: 2439
Exhaust pipes back in stock
FINALLY, I have the short exhaust pipe from the manifold to the muffler on 420-440 back in stock. For those of you that had inquired, sorry for the delay, they are here now.
Lavoy
Lavoy
- Mon Mar 05, 2007 7:52 pm
- Forum: Early model JD crawler technical support
- Topic: How far down should I go?
- Replies: 6
- Views: 7145
- Mon Mar 05, 2007 12:51 pm
- Forum: Show & Tell
- Topic: I finally get to push some snow
- Replies: 7
- Views: 9609
- Sat Mar 03, 2007 10:11 pm
- Forum: Show & Tell
- Topic: Here is a pic of my 1956 420 crawler with I think a 62 blade
- Replies: 17
- Views: 25460
- Sat Mar 03, 2007 10:09 pm
- Forum: Late model JD crawler technical support
- Topic: Adjust steering clutch pressure plate in a 350
- Replies: 1
- Views: 5015
- Sat Mar 03, 2007 4:34 pm
- Forum: Show & Tell
- Topic: I finally get to push some snow
- Replies: 7
- Views: 9609
I finally get to push some snow
All you guys with your pics of pushing snow made me jealous, so here are some from the snowy North. http://www.jdcrawlers.com/uploads/420.jpg http://www.jdcrawlers.com/uploads/4202.jpg Some of you have asked what I mean by "snow wings", here you can see how they work. http://www.jdcrawlers.com/uploa...
- Fri Mar 02, 2007 2:03 pm
- Forum: Off-topic discussions
- Topic: Temperature
- Replies: 19
- Views: 21275
An hour sooner, and he would have a pretty good chunk of change still in his pocket. Now the towing company and the body shop are going to get it. Can't realy fault the kid in the tow truck, at 35 degrees in wet snow, nothing with rubber tires would have done it unless it had chains. Again reinforce...