Facebook probably draws a lot of traffic away.
I try to visit once in a while as this site is full of knowledge and I don't want it to die.
Search found 609 matches
- Wed Jan 19, 2022 8:12 am
- Forum: Early model JD crawler technical support
- Topic: Forum
- Replies: 3
- Views: 3350
- Wed Jan 19, 2022 8:01 am
- Forum: Early model JD crawler technical support
- Topic: Potential 420c Purchase
- Replies: 11
- Views: 6465
Re: Potential 420c Purchase
Look for a tag on the generator. Delco Remy generators had tags on them (not saying it hasn't been removed or a rebuilt was installed at some point). In general, if the tag has a black background, they are 6 volts. 12-volt tags had a red background. 6 or 12 volts was generally embossed on the tags....
- Tue Nov 09, 2021 3:21 pm
- Forum: Early model JD crawler technical support
- Topic: Oil and oil recommendations
- Replies: 11
- Views: 12937
Re: Oil and oil recommendations
The right hand reverser has its own resovoir, so if you have one dont just put the oil in the transmision and think your good. there are seals between the revereser and transmission. You must be thinking of the other reverser. The gear type, with the lever to your right as you sit in the seat, I ha...
- Mon Nov 08, 2021 3:37 pm
- Forum: Early model JD crawler technical support
- Topic: engine oil for 1958 jd 440 ic
- Replies: 5
- Views: 4199
Re: engine oil for 1958 jd 440 ic
If a gas engine, Deere specified 10W30 in summer and 5W20 in winter. I don't think the 15W40 will hurt it though IF you aren't using it in the cold.
- Mon Nov 08, 2021 3:26 pm
- Forum: Early model JD crawler technical support
- Topic: Any body play around with rubber pads on 420 or other crawlers?
- Replies: 19
- Views: 15004
- Wed Nov 03, 2021 2:12 pm
- Forum: Early model JD crawler technical support
- Topic: Any body play around with rubber pads on 420 or other crawlers?
- Replies: 19
- Views: 15004
Re: Any body play around with rubber pads on 420 or other crawlers?
Do your tracks have snow holes in them? Could put a piece of steel bar through the chain underneath for a place to put an extra bolt through to secure whatever you're adding. I've thought about wrapping a strip of conveyor belt around the entire track to make the machine road friendly. Not sure how ...
- Sat Apr 17, 2021 5:59 pm
- Forum: Early model JD crawler technical support
- Topic: 420C Sediment bowl
- Replies: 10
- Views: 6720
Re: 420C Sediment bowl
While you are in there, remove the inlet fitting from the carb and you will find a strainer. It may need to be cleaned if the bowl screen was missing.
- Sun Mar 14, 2021 5:56 am
- Forum: Early model JD crawler technical support
- Topic: blade wont lift
- Replies: 7
- Views: 6285
Re: blade wont lift
I don't know how cold it is there but ice in the pickup tube and cylinders would cause this problem for me.
- Thu Feb 25, 2021 1:20 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 420c steering clutch adjustment
- Replies: 59
- Views: 31912
Re: John Deere 420c steering clutch adjustment
Are you absolutely sure you have free play after the clutch pedal lets go of the clutch, and it's not just the slop in the linkage?
Maybe your flywheel is warped.
Maybe your flywheel is warped.
- Thu Feb 18, 2021 2:29 am
- Forum: Early model JD crawler technical support
- Topic: Crawler 420 not starting...and worse
- Replies: 35
- Views: 527523
Re: Crawler 420 not starting...and worse
Having your battery on the fender may be part of the issue. With 6 volts your cables have to be twice the gauge or half the length that they would be on 12 volts. If your wire to the starter is longer than factory, then also make it heavier than factory.
- Thu Feb 18, 2021 2:18 am
- Forum: Early model JD crawler technical support
- Topic: Early 420C Tracks
- Replies: 5
- Views: 4763
Re: Early 420C Tracks
I also bought some 3/8" cold rolled stock, but never got around to welding it on.
- Thu Feb 18, 2021 2:13 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 420c steering clutch adjustment
- Replies: 59
- Views: 31912
Re: John Deere 420c steering clutch adjustment
I did not mean to say that having the bolt at the edge is correct adjustment of the fingers, just that it is as far as you can go with it and if it won't push the fingers in then it has to come apart. The fingers are levers, so as the clutch wears inward the fingers would move outward and the bolt w...
- Tue Feb 16, 2021 2:02 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 420c steering clutch adjustment
- Replies: 59
- Views: 31912
Re: John Deere 420c steering clutch adjustment
These old tractors get a lot of slop in the pedal that you might have mistaken for free play. I had to adjust mine recently and the clutch engages just off the footrest now, I know it's not correct but hard to tell with the wear in there. Based on only running for a few minutes I think your clutch w...
- Tue Feb 16, 2021 1:29 am
- Forum: Off-topic discussions
- Topic: Just a little taste
- Replies: 10
- Views: 22378
Re: Just a little taste
Texans are trying to keep their swimming pools unfrozen. It's a catastrophe!
-22 F is mighty cold by northeast standards, let alone Iowa. Keep the sinks in remote parts of the house trickling water.
-22 F is mighty cold by northeast standards, let alone Iowa. Keep the sinks in remote parts of the house trickling water.
- Tue Feb 16, 2021 1:22 am
- Forum: Off-topic discussions
- Topic: White Christmas!!!
- Replies: 6
- Views: 16746
Re: White Christmas!!!
I say a white Christmas does not exist. This year, we had a few inches still on the ground on Christmas Eve. It totally melted by Christmas morning. The very next day it snowed again.