Search found 749 matches
- Sun Jul 17, 2022 9:42 am
- Forum: Early model JD crawler technical support
- Topic: Deere 820/2010 track loader/backhoe Final Drive disassembly
- Replies: 13
- Views: 5087
Re: Deere 820/2010 track loader/backhoe Final Drive disassembly
Hello Sir, I definitely agree with Jim B. Contact Lavoy for your parts needs. His parts are properly vetted. Your case is likely the worst I have witnessed. I would power wash for a long time and then power wash some more. I would fill the case to the brim with hard water. I would leave it with wate...
- Tue Jul 05, 2022 5:41 am
- Forum: Late model JD crawler technical support
- Topic: 455E with an issue...whining sound
- Replies: 10
- Views: 5238
Re: 455E with an issue...whining sound
Are the hoe hoses hooked back to each other? Or are the left unhooked?
- Sun Jul 03, 2022 2:51 pm
- Forum: Late model JD crawler technical support
- Topic: 455E with an issue...whining sound
- Replies: 10
- Views: 5238
Re: 455E with an issue...whining sound
Am I reading this correctly, that there is nasty whining noise in the pump while the backhoe is off the machine?
Are the hoe hoses unhooked from the hoe and NOT hooked back together?
Are the hoe hoses unhooked from the hoe and NOT hooked back together?
- Sat Jul 02, 2022 8:46 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C hlr trouble in reverse only
- Replies: 11
- Views: 3844
Re: JD 450C hlr trouble in reverse only
The HLR is something that can be re-sealed.
- Sat Jul 02, 2022 6:45 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C hlr trouble in reverse only
- Replies: 11
- Views: 3844
Re: JD 450C hlr trouble in reverse only
The engine is mounted with four bolts to the bell housing. The unfortunate thing is that all the stuff attached and ahead of the engine need to come out.
- Sat Jul 02, 2022 1:15 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C hlr trouble in reverse only
- Replies: 11
- Views: 3844
Re: JD 450C hlr trouble in reverse only
Yes, engine will need to come out. Several good things that you don’t need to remove. Final drives, steering clutches. Sorry for you situation. When done it will be a great machine.
- Sat Jul 02, 2022 9:25 am
- Forum: Late model JD crawler technical support
- Topic: JD 450C hlr trouble in reverse only
- Replies: 11
- Views: 3844
Re: JD 450C hlr trouble in reverse only
Your situation as you have described sounds like the reverse clutch pack is slipping. I would be suspicious of leaking oring in the reverse pack.
- Tue Jun 28, 2022 4:58 pm
- Forum: Late model JD crawler technical support
- Topic: JD450C low range on HLR intermittent
- Replies: 2
- Views: 3065
Re: JD450C low range on HLR intermittent
Consider checking the linkage adjustment. Follow the H/L/R lever down to the battery box and along the transmission. There are adjustable joints there.
- Thu Jun 16, 2022 9:00 pm
- Forum: Late model JD crawler technical support
- Topic: Hunting Idle JD 450B
- Replies: 4
- Views: 2524
Re: Hunting Idle JD 450B
How long did you run the engine after the filter change. It sounds like air in the fuel system (kinda fits with the filter change). The is a priming lever to pump up the fuel. This lever is attached to the mechanical fuel pump on the right side of the engine, towards the front. My experience is that...
- Sat Jun 11, 2022 7:05 pm
- Forum: Off-topic discussions
- Topic: Electrician Here !
- Replies: 1
- Views: 9344
Re: Electrician Here !
Thank you. Much appreciated
- Fri Jun 03, 2022 6:42 am
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 215801
Re: '73 - 450B Crawler/Loader/Hoe Restoration
I may be mistaken, but I believe the tool is the same tool used for 5.9 Cummins. There are many inexpensive aftermarket tools for this available online.
- Thu Jun 02, 2022 6:07 pm
- Forum: Late model JD crawler technical support
- Topic: Adding a Tachometer
- Replies: 7
- Views: 3392
Re: Adding a Tachometer
The tach drive is near the right rear near the cylinder head. Very near the valve cover. And if I remember it is vertically oriented.
Online deere parts catalog. Here is a link.
https://partscatalog.deere.com/jdrc/sid ... gId/241913
Online deere parts catalog. Here is a link.
https://partscatalog.deere.com/jdrc/sid ... gId/241913
- Thu Jun 02, 2022 3:37 pm
- Forum: Late model JD crawler technical support
- Topic: 1/2” chain & 9/16” pads
- Replies: 11
- Views: 4930
Re: 1/2” chain & 9/16” pads
Doubtful. I don’t believe you can torque the bolts tight enough to hold and make up the bolt - hole difference.
- Fri May 27, 2022 9:04 am
- Forum: Late model JD crawler technical support
- Topic: Engine clutch has oil on it
- Replies: 3
- Views: 2541
Re: Engine clutch has oil on it
Is the weep hole open in the bottom of the bell housing? If this is plugged for a long time, condensate will add up to a lot and it wouldn’t take only a little oil to cloud the water. Especially since you had said your levels have not changed and you have not added .
- Tue May 24, 2022 8:42 pm
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 215801
Re: '73 - 450B Crawler/Loader/Hoe Restoration
Do not run your machine until the problem is identified. It sounds like you have a deadhead scenario. This can wipe your pump out very quickly. I would start by looking carefully at the disconnects.
Best regards, Bruce
Best regards, Bruce