JDcrawlers Messageboard

Well folks, that didn't work as well as i would have liked. Got the new 6 blade fan on and noticed my water pump shaft moved slightly, i checked and moved it by hand a bit to see that it cleared my fixed radiator as it had sprung a leak after blade blew off. Seems that was NOT the thing to do, once ...

and heres is Wishing ALL..... You and Yours a very Happy New Year !!!!!

got rad back already, picked up just after 9 am.!!!!

read up n pelletane gaskets and mouse turds as discussed very thoroughly in this forum.

First of all, Is anyone having trouble following the the instructions listed in the Q&A forum? if problems lets discuss an find solutions. We seem to be having quite a few folks using other means to post pictures and still having troubles. The biggest issue is that we cannot upload pics direct from ...

Lavoy,
is there a need of the 6 blade fan, does it run cooler? my 4 blade did seem to keep it cool enough. temp rises only when left idling a bit but does not overheat. Also what is price difference? should probably change thermostat and gasket while down anyhow

we do have a dedicated pic server on site if you are unaware of it. read q&a forum.

well folks, blew a blade off the fan got radiator a bit will see if locals can repair that. don't know if good idea to weld blade back on or better get another? Lavoy, do you have any available? mite as well chck radiator hoses if you have them as well...need grommets for valve cover, will need 4 of...

i have my router set up on my sears table saw as well, it has extensions on both sides of the cast iron, i added 1 1/4 breadboard to the open side and mounted the half inch router underneath and use the table switch to turn on and off as well as the guides, made our entire kitchen cabinets and inset...

Hope y'all have had a really nice Thanksgiving and all the pie as well!!

ok folks see if this helps any for the pic server...go to Q&A forum to see.

mmm http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10004/normal_SANYO298.JPG..??? http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10004/normal_SANYO298.JPG..??? .http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10004/normal_IMG_20170110_141405_450~0.jpg SANY0298.JPG ...

Just got done cleaning it up a bit...had 5-6 inches on porches and railings and trucks...driveway warm enough to keep her clean..blacktop..ground don't show as much...no machine pushing yet, aint hooked up yet anyhow!!! aint ready for this stuff yet.. regards..pic server instructions will get back t...

77ford, that really depends on the condition of the trusses and whether they are made strong enough to take the additional load as well as your winter snow loads, with the blown in there you probably cannot see condition and usually they overfill and create problems especially at vent eaves and cond...

log in on crawler site..go to bottom of page to question and answer forum...go to "new dedicated pic server" and read info therein.