JDcrawlers Messageboard

I will be doing both sides on the 350 gas dozer i recently bought for $2000 as a parts machine. after getting it home and playing around with it i was able to get the gas engine running and the winch working. I bought this for the six way blade and winch seeing the my other dozer has a manual blade ...

I would be interested in the logging arch for my 350 if you part it out. thanks Paul

need more info to help you, gas or diesil, does it have a reverser, does it boog down when you pull on the steering levers? was it stored inside or out side.

the bolt you tighten the brake band has rounded cut outs or detents so it does not back off on its own. so when you tighen it all the way it will ussally stop on a high spot, then back it off one complete turn and see how it feels when you pull the steering lever, then see how it works for turning o...

Hello, just bought another 350 dozer. by the serial # its a 1965 has a reverser and six way hyd. blade and tee handle controls. this machine has a longer track base then my 1966, 5 rollers and an idler. could someone tell me the differance and which one they think is better? also will the blades int...

Thanks for your reply Dustin, I have bought a threaded rod and new nuts from MSC and i plan on replaceing both soon. I used my porta power to tighten track and put a piece of steel to keep it tight till i get to fixing it. I would like to put in new adjusters also but too much money. I can list part...

I have a 350 dozer with manual track adjusters. The right side adjuster is stripped and i cannot tighten track. I was thinking of buying 1.5-12 threaded rod and new nuts and making my own. has anyone done this? Does any see why this would not work? I would love to replace with new ones but money is ...

I just reread the manual and it says nothing about putting the first fiber disk behind snap ring. I did my 350 loader last year and just did my 350 dozer last week .
Can someone Please clear this up? Thanks Paul

Thanks Matt, I did call Five star, they have two after market ones in stock for $150.00 each.

Hello, i am in need of a couple track rollers for my 350 dozer, Lavoy do you sell them ? Or can some tell me the best place to find them? Thanks

Can someone tell me what the fiber and steel clutch plates should measure? Thanks Paul

This has a three foot long lever mounted to what looks like a big master brake cycl. and 1/4 inch lines that run down to the winch. thanks for the help i will look for model # w hen i get home and try and post some pics

I just bought a 1966 350 dozer with a manual 6 way blade and a winch.This machine has manual adjusters for the tracks, is it as simple as adjusting the big nut on the threaded shaft? Can someone tell me about the winch i have? it has a lever on the left side that the previous owner said was for oper...

I just did mine, the seal's going into the final was bad. Made a mess of everything. i used oven cleaner and power washed it off worked great. my 350 (older) used two seals. I bought everthing from Lavoy, great guy with ALOT of info. I would be glad to tell you how i did mine email me with your phon...

i have a 350 crawler/loader with a reverser,I am looking for part numbers for the tube the throw out bearing is on and the seal that the clutch basket shaft goes through into the final drive.
thanks Paul