JDcrawlers Messageboard

Digitup2 I think I understand what you are saying about the banging, are you saying the rollers in the pictures are worn out?

Thanks everyone for all the good info. on this, it is great to have so much knowledge here that you can tap into when you need to know something.

I think I put them on and see what they look like and if that goes ok then try them out, if I ever get it finished

Leonard I think the show and tell is for crawlers, if you want to give me your email I'll send you some pictures. Mike

Leonard heres some more pictures of both sides, I think the first picture I posted on the first post was of the worst place, I also took some of the rollers that I would be putting the tracks on, I dont see or feel anything wrong with them. I'll also put some pictures of the other tractors sitting a...

Leonard no its not going to be for show, I do get alittle carried away sometime, my brothers was just laughing at it saying it would never get dirty :D , but no I'm going to use it some I have some little projects I'm wanting to do with it, its like my other tractors it will be semiretired :D , I ha...

Leondard what are you calling the rails? is that what I'm calling the link or chain? sorry for what is proberly a dumb question, and no rtrichard I dont have an extra 5k or 1k

OUCH!, Digitup are you saying my chains is scrap? thats not what I wanted to here

Thanks guys, that makes me feel a little better about using them now, thats proberly what happened to them, I'll look at them when I get them on and see if they going to run on the roller ok thats a good point, you know I'm not putting wheels on the battery! I'm putting tracks

Would one of you crawler guys tell me what caused the wear on the side of the links in the first picture, hope I didnt screw up by taking these off another dozer I had about 3 yrs. ago :? , they was put on that dozer about 20 yrs. ago, but not run much the engine went down in it shorty afterwards, s...

Thanks for the info. guys, I have thought about the hyd. hose it had one on it, I just like the ideal of the metal one, and KenP you are right it goes to the control valve, I should have said toward the tank, but anyway it is the presure line, I have had it all apart just putting it back together al...

I need the presure metal Hyd. line that runs from the hyd. pump to the tank, for a 350B dozer, setting in the seat its the line that comes out on the left side of the pump, I think its two piece, I need both, but would be interested in either one. Thanks Mike 4233239547

If you dont already know there are two different ones, dont ask how I know

You can get the seal at NAPA, I just got one last week.

I think they are listed on ebay, thats where I found mine.

My guess would be on the oil presure is that its a combination of water thinning the oil, the oil thinning as the engine heats up and engine wear [ to much bearing clearance] all put together adds up to low oil presure Good luck