Search found 1874 matches

by jtrichard
Mon Jan 30, 2017 11:53 am
Forum: Early model JD crawler technical support
Topic: Alternative sealing rings for 2010
Replies: 5
Views: 6367

Second one (AT15975T) last price DEERE $70 NLA crosses over to a nat 415458 first AT12996T from JD last price $110 as you said NLA..and NO direct crossover So you MAY need to reuse (if you can) or need shaft and bore size and thickness to find by size I am sure you wont find one like JD used with 3 ...
by jtrichard
Sun Jan 29, 2017 4:59 pm
Forum: Early model JD crawler technical support
Topic: re..jd40 vs jd40s whld three point interchange?*move tojd40v
Replies: 16
Views: 12070

To add to STANS post "If you see Debug Mode or No Posts Exist, you have" Just crossed over to the TWILIGHT ZONE Ha HA HA Ha :evil: :evil: :evil:
by jtrichard
Sat Jan 28, 2017 11:46 am
Forum: Late model JD crawler technical support
Topic: john deere 350c transmission and final drive oil question
Replies: 7
Views: 13251

papyrus wrote:is there a difference between B and C ?
on my 450 B the steering breaks and clutches are dry.
YES "C"s are wet..... "B"s are DRY ( unless you are UNLUCKY :cry: )
by jtrichard
Sat Jan 28, 2017 11:43 am
Forum: Early model JD crawler technical support
Topic: test to see if I should try posting
Replies: 11
Views: 7693

Same as Stan said here Also when a AN older thread shows up as NEW (with nothing new) I am guessing that someone has tried to post on it and MET MISTER DE-BUG Stan (and others) try this keep the posts small and go back and edit them I did this here and so far it has not came up with DE-BUGGGGGGGGGGG...
by jtrichard
Thu Jan 26, 2017 11:59 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: Ripper shanks 350C wanted
Replies: 28
Views: 24556

IS that 455 down under also? probably is made there then
by jtrichard
Thu Jan 26, 2017 11:03 am
Forum: Late model JD crawler technical support
Topic: 450D forward/reverse clutches slipping
Replies: 3
Views: 3938

WOW were was "DEBUG" on that last post ?? ..... Lavoy are you making head way with the problem ??
by jtrichard
Wed Jan 25, 2017 9:25 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: Ripper shanks 350C wanted
Replies: 28
Views: 24556

SURE looks to be the same.... I looked at a few hundred ripper pics and CANT find any others like those two
by jtrichard
Wed Jan 25, 2017 11:04 am
Forum: Late model JD crawler technical support
Topic: 450 EXHAUST MANIFOLD
Replies: 3
Views: 4309

looks to be a ...T20200 .... google search comes up with a lot here is one used one http://www.worthingtonagparts.com/John- ... -WU-T20200
by jtrichard
Thu Jan 19, 2017 7:53 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: Ripper shanks 350C wanted
Replies: 28
Views: 24556

someone must have tried to post as this came up as new post today and it is not
by jtrichard
Thu Jan 19, 2017 7:52 pm
Forum: Off-topic discussions
Topic: A hard lesson in proper dozering...
Replies: 7
Views: 8345

someone must have tried to post as this came up as new post and is 10 months old
by jtrichard
Wed Jan 18, 2017 11:21 am
Forum: Lavoy's Little Shop O' Deeres
Topic: Ripper shanks 350C wanted
Replies: 28
Views: 24556

More pics of both the ripper and front bucket ....Any tags???
by jtrichard
Wed Jan 18, 2017 10:51 am
Forum: Lavoy's Little Shop O' Deeres
Topic: Ripper shanks 350C wanted
Replies: 28
Views: 24556

OH it looks to be factory built just for WHAT is the question?
by jtrichard
Wed Jan 18, 2017 12:11 am
Forum: Lavoy's Little Shop O' Deeres
Topic: Ripper shanks 350C wanted
Replies: 28
Views: 24556

With that BEAST on the rear you should not need any other counterweight

There is NOW a page 2
by jtrichard
Tue Jan 17, 2017 5:52 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: Ripper shanks 350C wanted
Replies: 28
Views: 24556

GOTTA love debug