Thanks, agree about the compromised system. By raising the bucket I meant a foot or two so the machine can be moved without dragging the bucket.
Rick
Search found 73 matches
- Thu Jul 22, 2021 5:31 pm
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 214718
- Thu Jul 22, 2021 1:13 pm
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 214718
Re: '73 - 450B Crawler/Loader/Hoe Restoration
Other than cold starting the only other reason I can think of for disconnecting the hydraulic pump would be if you blew a line along the chassis. (not a cylinder line) After raising the bucket with the last gasp of hydraulic fluid you could disconnect the pump and limp to the trailer without burning...
- Fri Jul 09, 2021 12:03 pm
- Forum: Late model JD crawler technical support
- Topic: 450C delivered tomorrow
- Replies: 4
- Views: 3880
Re: 450C delivered tomorrow
Welcome to the club. I have the same machine.
Rick
Rick
- Wed Jun 02, 2021 4:45 pm
- Forum: Early model JD crawler technical support
- Topic: JD 420c crawler
- Replies: 3
- Views: 2969
Re: JD 420c crawler
On my 450C, I can collapse the track tensioner and with come-a-longs, steel tooth picks and swearing I have successfully remounted a track without breaking it.
Good luck, you will find new and creative combinations of "special" words.
Rick
Good luck, you will find new and creative combinations of "special" words.
Rick
- Wed May 19, 2021 3:27 pm
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 214718
Re: '73 - 450B Crawler/Loader/Hoe Restoration
No, as a novice, I wrote a check.....
- Mon May 17, 2021 1:47 pm
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 214718
Re: '73 - 450B Crawler/Loader/Hoe Restoration
I just did a complete undercarriage rebuild on my JD450C trackloader. You might try these folks, they had all the parts I needed in stock. If you give them a part number, odds are they have it even if it is not on the web site.
https://www.brokentractor.com/c/john-deere-dozer-parts/
Rick
https://www.brokentractor.com/c/john-deere-dozer-parts/
Rick
- Wed May 12, 2021 9:11 am
- Forum: Late model JD crawler technical support
- Topic: 450C track loader hose replacement question
- Replies: 16
- Views: 10705
Re: 450C track loader hose replacement question
The curl steel tubes were not perfectly lined up with the opening in the top of the tower. The steel part of the hose connector presses on the tower so you can not start the thread. Once the steel line was out, the hose threaded on just fine and I could get the assembly in easily. Also, I could use ...
- Mon May 10, 2021 2:49 pm
- Forum: Late model JD crawler technical support
- Topic: 450C track loader hose replacement question
- Replies: 16
- Views: 10705
Re: 450C track loader hose replacement question
Here is the long overdue report. Sorry, no photos, but the layout of the hoses and piping is very obvious once you look at it. Once we finished the undercarriage replacement I started on the hoses. Lifted the boom by putting it in "float" and lifting with an excavator that my neighbor just happens t...
- Wed Apr 21, 2021 5:24 pm
- Forum: Late model JD crawler technical support
- Topic: 350B loader Arm bushings, pins and lever arms rebuild
- Replies: 4
- Views: 3335
Re: 350B loader Arm bushings, pins and lever arms rebuild
What would be a good grade of steel to use for fabricating pins?
- Thu Apr 08, 2021 7:02 am
- Forum: Late model JD crawler technical support
- Topic: 350B and 350C
- Replies: 3
- Views: 2968
Re: 350B and 350C
The serial# should tell you as well.
- Thu Mar 25, 2021 3:28 pm
- Forum: Late model JD crawler technical support
- Topic: 450C track loader hose replacement question
- Replies: 16
- Views: 10705
Re: 450C track loader hose replacement question
Will do/
Rick
Rick
- Wed Mar 24, 2021 6:52 am
- Forum: Late model JD crawler technical support
- Topic: 450C track loader hose replacement question
- Replies: 16
- Views: 10705
Re: 450C track loader hose replacement question
Thank you to all for the suggestions. Currently replacing the track assembly on that side and then will lift the bucket with a chain fall and attack the hoses. Looks like there will be enough room once lift cylinder is strapped and retracted. I suspect I will use some new and interesting combination...
- Mon Mar 22, 2021 2:14 pm
- Forum: Late model JD crawler technical support
- Topic: 450C track loader hose replacement question
- Replies: 16
- Views: 10705
450C track loader hose replacement question
I have a 450C track loader and blew the lift cylinder hose between the cylinder and the block where it changes to steel. The hose is completely surrounded by the loader pedestal and looks like a right proper bi*&h to get out. Anyone have any suggestions as to the best (easiest) way to access the hos...
- Fri Jan 22, 2021 5:49 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Undercarriage replacement parts
- Replies: 2
- Views: 2650
Re: 450C Undercarriage replacement parts
I am replacing the undercarriage on my 450C and have gotten most parts from Broken Tractor. Most of the bolts were locally sourced at a commercial nut and bolt house. Nice people, good service, everything seems to be in stock. Good luck, have your gas axe handy for the rock guard and roller bolts. R...
- Thu Oct 01, 2020 9:55 am
- Forum: Late model JD crawler technical support
- Topic: Adding a 2nd directional control valve
- Replies: 2
- Views: 2342
Re: Adding a 2nd directional control valve
Building on Jim B's thought, My 450Ctrackloader came with an unused spool on the side of the control valve set for the bucket. It is capped off just waiting for hoses and a handle to be attached to control a 4 in 1 bucket or grapple.