Search found 1150 matches
- Sun Aug 26, 2018 3:12 pm
- Forum: Off-topic discussions
- Topic: Are all women crazy, or is it just mine?
- Replies: 12
- Views: 12861
Re: Are all women crazy, or is it just mine?
just grin and bare it!!!! not bear!
- Thu Aug 09, 2018 11:59 am
- Forum: Early model JD crawler technical support
- Topic: 40c clutch free play
- Replies: 10
- Views: 8580
Re: 40c clutch free play
have you checked linkage worn pins etc?
- Thu Aug 09, 2018 11:56 am
- Forum: Off-topic discussions
- Topic: 6volt gen to 12 volt gen
- Replies: 5
- Views: 5833
Re: 6volt gen to 12 volt gen
any answers? wire same as 6 volt and use neg ground, need details
- Thu Aug 09, 2018 8:40 am
- Forum: Off-topic discussions
- Topic: 6volt gen to 12 volt gen
- Replies: 5
- Views: 5833
6volt gen to 12 volt gen
am working on Farmall H...it had alternator on it that got knocked off and torn up..has coil and resister....12volt gen will get under hood which alt did not...need to check if any way to find coil volt? or replace to known 12 volt w/resistor..and then how wire? and which ground + or - ? course new ...
- Mon Aug 06, 2018 7:26 pm
- Forum: Off-topic discussions
- Topic: City people, gotta love them, or laugh at them
- Replies: 22
- Views: 22323
Re: City people, gotta love them, or laugh at them
well our Rolling Acres Mall had all three ...for a while...they be gone now these last 5 or so years some of the mall still stands but i see a lot of semi's parked there and a bus stop ? to where i don't know! usta be a firestone store there too but that gone as well!
- Mon Aug 06, 2018 7:06 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Final drive rebuild
- Replies: 3
- Views: 3532
Re: 450C Final drive rebuild
have you read all the the 'new pic server' message on the question and answer forum found at the bottom of the board index when you art logged in to the crawler site? you have to register with Lavoy with your own logon and password after Lavoy sets it up...you can then upload pics from computer...no...
- Sun Aug 05, 2018 6:40 am
- Forum: Early model JD crawler technical support
- Topic: jd440ic cam pump
- Replies: 33
- Views: 22046
Re: jd440ic cam pump
jimB, well, i eliminated the filter section and the other hose shop had a junction (nipple) fitting and 2 female swivel fittings, that were close to replacing the filter boss, after i measured with the scrap pump i was 1/2 inch too long to mate up. So went back and got swivel fitting with male end t...
- Sat Aug 04, 2018 7:26 pm
- Forum: Off-topic discussions
- Topic: Private messages
- Replies: 4
- Views: 4897
Re: Private messages
NO Paul....they stay in the outbox till they open them and read them...they then show up in your sent box..then you know they got em//// send me a pm and watch it..ALSO most folks don't always log in to view the board....when logged in if you have private message come in, the private message tag at ...
- Sat Aug 04, 2018 7:15 pm
- Forum: Early model JD crawler technical support
- Topic: jd440ic cam pump
- Replies: 33
- Views: 22046
Re: jd440ic cam pump..READY AND WILLING
and the GOOD NEWS IS! After Mr. Lavoy put new gaskets/ o rings and such in the cam pump and i got it back and installed/////She WOrKS like a charm for the first test anyhow.... Maybe tomorrow i will get to push a bit of dirt just to make her work a bit. The blade raises like she going to town!...how...
- Thu Aug 02, 2018 3:40 pm
- Forum: Late model JD crawler technical support
- Topic: test
- Replies: 2
- Views: 2410
Re: test
need idea how you proceeding...explain and i will walk you thru the process..
you cannot upload pics directly from phone!!!
dtoots1
you cannot upload pics directly from phone!!!
dtoots1
- Thu Aug 02, 2018 3:31 pm
- Forum: Off-topic discussions
- Topic: rust penetrants
- Replies: 8
- Views: 6839
Re: rust penetrants
aint concerned with the test....its the end result...showing the weasel piss...by far to be the best release agent. tho surprises me that wd40 shows up better than pb blaster and liquid wrench better yet.
suspect test accomplished with new torqued bolts in some fashion?
suspect test accomplished with new torqued bolts in some fashion?
- Thu Aug 02, 2018 7:16 am
- Forum: Off-topic discussions
- Topic: rust penetrants
- Replies: 8
- Views: 6839
rust penetrants
some usefull information for all you folks!..found in atv forum..
force needed!!!!
No Penetrant.......... 516 pounds
WD-40................... 238 pounds
PB Blaster .............. 214 pounds
Liquid Wrench ....... 127 pounds
Kano Kroil .............. 106 pounds
ATF-Acetone mix*.... 53 pounds
dtoots1
force needed!!!!
No Penetrant.......... 516 pounds
WD-40................... 238 pounds
PB Blaster .............. 214 pounds
Liquid Wrench ....... 127 pounds
Kano Kroil .............. 106 pounds
ATF-Acetone mix*.... 53 pounds
dtoots1
- Fri Jul 27, 2018 1:47 pm
- Forum: Late model JD crawler technical support
- Topic: reverser oil flow question
- Replies: 94
- Views: 8751337
Re: reverser oil flow question
not to question your checking, but you mention the hose interior deteriorated, is possible piece broke off and lodged in critical location???
- Wed Jul 25, 2018 7:18 pm
- Forum: Early model JD crawler technical support
- Topic: Going to look at an MC
- Replies: 5
- Views: 4461
Re: Going to look at an MC
also edit your profile, access is in the drop down box where you log in to jdc site....show at least your home area city or something to let others know where you at. these folks have a lot of experience and will help!
- Wed Jul 25, 2018 2:12 pm
- Forum: Early model JD crawler technical support
- Topic: Going to look at an MC
- Replies: 5
- Views: 4461
Re: Going to look at an MC
you do know you have to send emailor pm message to Lavoy with your login and password for the pic server? once is validated you then can access and upload pics to the pic server you then copy the pics file name back the pages back to your post and paste the file name into the IMG insert at top of po...