Search found 115 matches
- Tue Oct 03, 2017 5:42 pm
- Forum: Early model JD crawler technical support
- Topic: 420c steering clutch issue
- Replies: 11
- Views: 10383
Re: 420c steering clutch issue
Its actually pretty easy, make sure you have correct tool to set pressure plate. And good tech Manuel.
- Mon Sep 11, 2017 12:41 pm
- Forum: Early model JD crawler technical support
- Topic: John Deere 420 C
- Replies: 25
- Views: 17400
Re: John Deere 420 C
I have bin trying trust me. Where does shaft from trans to engine come apart? I was going to pull trans and finals off, then take the front half and pick up off cross members.
- Sun Sep 10, 2017 6:58 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 420 C
- Replies: 25
- Views: 17400
Re: John Deere 420 C
My brake and clutch pedal are rusted together as well, I need to split crawler for sure. What is most efficient way to split? In parts book it looks like there is a spring on shaft on the inside, You would think it's broken worn out by now. Do I have to remove shaft completely from machine to clean ...
- Thu Aug 24, 2017 7:45 pm
- Forum: Early model JD crawler technical support
- Topic: JD Lindeman Tool Carrier
- Replies: 3
- Views: 3887
Re: JD Lindeman Tool Carrier
I was wrong really nice lindeman with tool carrier went for 7,500 out of NH auction
- Sat Aug 19, 2017 8:04 pm
- Forum: Early model JD crawler technical support
- Topic: JD Lindeman Tool Carrier
- Replies: 3
- Views: 3887
Re: JD Lindeman Tool Carrier
If you really want a tool carrier look around and find a good one. There are auctions all over the US that have Lindemans with tool carriers on them. Depending on condition you should be able to pick one up for 8,000$ and up.
- Fri Aug 11, 2017 6:36 pm
- Forum: Early model JD crawler technical support
- Topic: 3pt toplink lengths
- Replies: 4
- Views: 4371
Re: 3pt toplink lengths
I have an extra top link if you would like the correct center link,
- Wed Jul 12, 2017 7:19 pm
- Forum: Off-topic discussions
- Topic: NY Expo
- Replies: 0
- Views: 2881
NY Expo
Anyone go to Canadagua?
- Sun Apr 16, 2017 9:25 am
- Forum: John Deere crawler FAQ's
- Topic: 420 crawler serial numbers and production figures
- Replies: 14
- Views: 160389
LP
Any LP crawlers ever built?
- Mon Feb 13, 2017 8:05 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 crawler parts machine
- Replies: 11
- Views: 11057
- Sun Feb 12, 2017 10:10 am
- Forum: Early model JD crawler technical support
- Topic: 2010 crawler parts machine
- Replies: 11
- Views: 11057
2010 parts
Any 3pt parts? Rear belly pan?
- Fri Jul 29, 2016 7:40 pm
- Forum: Show & Tell
- Topic: 140 with tracks
- Replies: 3
- Views: 6003
140 with tracks
Would someone please guide me to the garden tractor with tracks and how they did it. Thought it was a 140 garden tractor???? And I thought. I saw it on this forum. I need to build it! TY
- Wed Jul 27, 2016 8:34 pm
- Forum: Off-topic discussions
- Topic: Semi-Truck Weight
- Replies: 12
- Views: 10516
80,000 pounds combined is the max with 5 axles, and no permits. I think with permits I can run just under 100,000 with 5 axles, depends on tire size, or I should say per square inch of rubber on the ground. 900 pounds per square inch I thought it was. Each state varies but bridge formula is simaler....
- Sun Feb 07, 2016 7:27 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: MC's in for parts
- Replies: 7
- Views: 8177
- Fri Dec 25, 2015 6:54 pm
- Forum: Early model JD crawler technical support
- Topic: Hydraulic problem
- Replies: 5
- Views: 5265
- Thu Dec 24, 2015 9:29 pm
- Forum: Early model JD crawler technical support
- Topic: Track pads
- Replies: 14
- Views: 10354