Search found 747 matches
- Mon Jan 13, 2020 12:03 pm
- Forum: Late model JD crawler technical support
- Topic: Vandalism guard and tool tray insert for the left box
- Replies: 46
- Views: 25014
Re: Vandalism guard and tool tray insert for the left box
PM sent to oldmetalmender. I agree to send my damaged vandalism guard to you to be measured as a pattern. As above, I would like this original cover and a repo cover sent back to me. I will pay you for the repo cover. I would like to agree on a reasonable $$ for your time and new vandalism guard. Be...
- Fri Jan 10, 2020 6:09 pm
- Forum: Late model JD crawler technical support
- Topic: Vandalism guard and tool tray insert for the left box
- Replies: 46
- Views: 25014
Re: Vandalism guard and tool tray insert for the left box
I would be more than happy to lend my panel to you for measurements. I would like my original panel back. I would like one of your new panels (modeled after my original). I would pay you $$$. We would just need to agree on a price. If I can find a tool tray or measurements, I would like 1-2 trays. I...
- Thu Jan 09, 2020 9:46 pm
- Forum: Late model JD crawler technical support
- Topic: Vandalism guard and tool tray insert for the left box
- Replies: 46
- Views: 25014
Re: Vandalism guard and tool tray insert for the left box
Nice eye spy catch. Those guys are always very pricey. But they are not far from me. I’m in West Central Iowa. And they are in North West Iowa. Maybe I will give them a call.
I would like to work some deal out that would benefit us and maybe others. That is regarding the vandal guard and tool tray.
I would like to work some deal out that would benefit us and maybe others. That is regarding the vandal guard and tool tray.
- Wed Jan 08, 2020 1:32 pm
- Forum: Late model JD crawler technical support
- Topic: Vandalism guard and tool tray insert for the left box
- Replies: 46
- Views: 25014
Re: Vandalism guard and tool tray insert for the left box
Hello oldmetalmender, I had a near NOS example. Last summer I blew a boom cylinder hose while on a project (out in the middle of no where). I inspected all the hoses, and they were at the end of service cycle. I choose to replace all the hoses. I was frustrated and got in a hurry. I rolled the bucke...
- Tue Jan 07, 2020 9:11 am
- Forum: Late model JD crawler technical support
- Topic: Vandalism guard and tool tray insert for the left box
- Replies: 46
- Views: 25014
Vandalism guard and tool tray insert for the left box
I am looking for a few final pieces to complete my 1977 450C trackloader. I would like to buy the vandalism guard for the instrument panel and the tool tray that fits inside the left box, above the battery.
Any help or leads are appreciated.
Best regards, Bruce
Any help or leads are appreciated.
Best regards, Bruce
- Tue Jan 07, 2020 9:05 am
- Forum: Late model JD crawler technical support
- Topic: JD450C third head gasket This is getting old
- Replies: 168
- Views: 165142
Re: JD450C third head gasket This is getting old
I have used a couple different vendors, that advertise in the “Green Magazine” that recondition and restore the original gauges. The tachometer no longer bounces. Nice and smooth at all engine speeds. The face was re-screened and looks original.
Best regards.
Bruce
Best regards.
Bruce
- Sun Jan 05, 2020 8:58 am
- Forum: Late model JD crawler technical support
- Topic: $500 JD 350
- Replies: 2
- Views: 2393
Re: $500 JD 350
4 in 1 bucket to boot!! That is a very good deal. Thanks for the post, Bruce
- Sat Jan 04, 2020 7:09 am
- Forum: Off-topic discussions
- Topic: Cutting Edge
- Replies: 22
- Views: 17219
Re: Cutting Edge
Radio silent. I have not seen a post or heard from him. Makes be worry. Prayers to him and family.
- Wed Jan 01, 2020 11:27 am
- Forum: Late model JD crawler technical support
- Topic: JD350 losing power after running 10min
- Replies: 7
- Views: 4496
Re: JD350 losing power after running 10min
Does the fuel tank have a vent like the 450’s. Have you tried running it with the fuel cap off?
Gaspumpsam has beat me to it, but we are on the same line
Gaspumpsam has beat me to it, but we are on the same line
- Sun Dec 29, 2019 3:46 pm
- Forum: Early model JD crawler technical support
- Topic: Lindeman cutch adjustment
- Replies: 6
- Views: 4188
Re: Lindeman cutch adjustment
Fork moves sleeve, toggle and dogs move inside of sleeve and over-center, locking clutch.
- Wed Dec 25, 2019 8:08 am
- Forum: Off-topic discussions
- Topic: Merry Christmas
- Replies: 6
- Views: 5949
Re: Merry Christmas
Hello Crawler Buddies,
Merry Christmas to each and all.
Best regards, Bruce
Merry Christmas to each and all.
Best regards, Bruce
- Tue Dec 24, 2019 3:00 pm
- Forum: Late model JD crawler technical support
- Topic: creeping dozer blade
- Replies: 1
- Views: 1813
Re: creeping dozer blade
You will need to isolate those identified components. The easiest to test would be the cylinders. You will need to remove the hoses to the dozer up and dozer down cylinders on both sides. I have used made up hoses to connect the up circuit to the down circuit on the same cylinder. (One hose for the ...
- Thu Dec 19, 2019 12:21 pm
- Forum: Early model JD crawler technical support
- Topic: Water in Oli
- Replies: 9
- Views: 6547
Re: Water in Oli
Might research Seafoam hydraulic oil additive. Lots of positives on this forum.
- Tue Dec 17, 2019 10:25 am
- Forum: Off-topic discussions
- Topic: 1961-1965 GMC 9000 snub nose
- Replies: 2
- Views: 3356
Re: 1961-1965 GMC 9000 snub nose
Sounds like a super cool project. I don’t have any parts for your project, but I am a GMC fan. There are tons of threads and info on this site. Might be worth a try in the “heavy hauler” forum.
http://67-72chevytrucks.com/vboard/
http://67-72chevytrucks.com/vboard/
- Sat Dec 07, 2019 5:40 pm
- Forum: Early model JD crawler technical support
- Topic: Implements for 420C
- Replies: 10
- Views: 8491
Re: Implements for 420C
Here is a CL ad for an 810 plow. Not sure of $$, do your due diligence
https://desmoines.craigslist.org/grd/d/ ... 29314.html
https://desmoines.craigslist.org/grd/d/ ... 29314.html