JDcrawlers Messageboard

If the steel discs are just surface rusted and are structurally sound, you can get away with reusing them.
The fiber discs when wet "grow" in size and there is no fix for that.
Lavoy

Unless you like pulling final drives, replace them. I know I know, I sell clutch discs, but nonetheless, for the effort involved, it is not worth having to redo it. If they have been that wet, they are damaged at least to some extent. Picture hosting instructions are listed at the top of the show an...

Been a while, but I know there is a set screw that comes into play somehow. Double check your service manual.
Lavoy

I am still on the road, give me a call next week.
Lavoy

I don't recognize it, especially the -3 on the end.
Lavoy

Seems to me about 3 ohms, but could be wrong. It goes in the hot wire to the coil. A Chrysler ballast resistor should work.
Lavoy

I should have rockershaft, would need to check.
Rebuild kit will vary depending on how deep you want to get.
Lavoy

43e 0 and 440 will work as well, but will not be correct.
I have a 420 block and head on hand if you need one.
Lavoy

Howard,
As long as it is set up for a hoe, should go right on.
Lavoy

FINALLY, I have the short exhaust pipe from the manifold to the muffler on 420-440 back in stock. For those of you that had inquired, sorry for the delay, they are here now.
Lavoy

The weld on sprocket rings I think he is referring to are the weld on 350 rims, they do not fit a 2010.
Lavoy

Where I am at right here, it is "pool table" flat for the most part. That is why the kids harass me for a snow hill every Winter. Like I really need an excuse to push snow, but that is what I tell people.
Lavoy

That is an aftermaket blade, I can't help on the manufacturer. There might be a tag on it somewhere that will identify it, or maybe someone where will recognize it.
Lavoy

If all you are doing is the track adjusters, any grease guy will be fine.
Levers should sit on the stops, if they don't, something is out of whack.
Lavoy

All you guys with your pics of pushing snow made me jealous, so here are some from the snowy North. http://www.jdcrawlers.com/uploads/420.jpg http://www.jdcrawlers.com/uploads/4202.jpg Some of you have asked what I mean by "snow wings", here you can see how they work. http://www.jdcrawlers.com/uploa...