JDcrawlers Messageboard

i just did this on mine....i used the special tool...it isn't anything "special" but i did the job in under an hour... if you can go to jdemarris' picture storage website- i found it and saved a bunch of shots- it will show you the tool... i took pics to finish my tech thread on how to do this job, ...

welcome from another newbie....

sure seems like lots of good info, here.....

thanks for replying.....i'll certainly look........

i just cleaned the mud from the undercarriage a few hours ago, but i didn't pay any attention......

I bought this 450C. It wouldn't hardly back up some times, almost like the clutches were slipping. I got to reading here and there, bought the service manuals and wound up replacing the spin on filter behind the radiator. I also replaced the filter in the hyd. tank (it had ruptured and split the sid...

Ok, here we again........ As I said, I didn't take enough pics to show how I did it but it's nothing special..... Here's the after pics: Just got the bearing out: http://i35.photobucket.com/albums/d168/flatheadyoungin/IMG_1365.jpg I took a hacksaw blade and put one in a little single handle holder. ...

That went a bit better than what I thought..... Here's an over-all pic of the injector pump..... http://i35.photobucket.com/albums/d168/flatheadyoungin/IMG_1361.jpg Here's a pic of the timing marks that are under the little cover......I read about them but a pic is much better, I like to see and do ...

oh, my order for all of this stuff, shipped was around $80......i'm sure i paid more for the torx bit than from other places and i'm sure the other stanadyne items for more than they should have been but that's ok....i like to learn, have spare parts and if that's all it takes to put her back on tra...

I have a 450C that has been pumping fuel in to the crankcase. Long story short, I replaced the fuel transfer pump and that didn't fix it. So, after a lot of internet surfing, finding this site again, joining this site and finding jdemarris' posts, I went and pulled my injector pump. I've never worke...