JDcrawlers Messageboard

Doing an engine clutch replacement. Flywheel has a few odd cracks in it. Anything to worry about? These cracks are on the engine side of flywheel. No cracks on clutch side. Also looking for the distance from newly turned flywheel clutch face to where the pressure plate mounts. I know that after turn...

Thanks for your replies. I am green with enlightenment.

I am looking at a 1010 dozer that appears to be smaller than the 1010 in my back yard. One of the differences is it has 4 rollers versus 5 rollers on the undercarriage of the one I have. Serial number is 1010 C 22041. Wondering what's up with that.

Let your fingers do the walking....

Here's a link: https://pittsburgh.craigslist.org/hvo/d ... 85199.html

When you are done getting yours adjusted come over my way. I'll let you adjust my 440!

http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10005/thumb_20170617_145846.jpg Posted thumb-nail, I didn't want that. But after a little bit thought I did end up with this pic. I used the site's dedicated photo hosting page, http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/ ht...

I might be mistaken but I think that is the numbers for the loader part of your machine. The machine serial number plate on the one I have is on the right side of engine.

Thanks ralph. Machine doesn't have pto. Now I know!

Does this lever lock in both my left and right drives?

I see that no photo is showing so...It's located just left and forward of my shifter on transmission.

Thanks for the replies. I tried in vain days ago to reply to posts, just would not do it.

While the subject is interchanging parts from 1010 to 440, will the tracks from a 1010 fit the 440?

Anyone have any idea why my hydraulic pump is mounted in this fashion? It has a short shaft connected to crank.

I took up Gil's offer of a hood and made the trip Saturday. I got to meet Gil and see a part of of his collection of four-forties. I got me a hood.

Here's a picture of Gil, on the left, and I.

Here are a couple of photos of the hood in question. Could it have been the two piece hood I've seen used on the right side booms. http://pennrunpictures.weebly.com/uploads/1/0/1/9/10192061/20161111-101758_orig.jpg http://pennrunpictures.weebly.com/uploads/1/0/1/9/10192061/20161111-101752_orig.jpg

Thanks for the reply and the info yellowcrawler. The man at Farm Parts told me it must of been a hood off a gas job. It had a tag attached that it was for a 440. It was about ten inches shorter than the one I have. The one I have almost looks homemade. Pretty beat up too. It might have to due. This ...