Search found 169 matches
- Sun Jan 07, 2007 6:56 pm
- Forum: Early model JD crawler technical support
- Topic: 40c and 420c hydraulic pump
- Replies: 15
- Views: 14966
About how much pressure should they be running? My 40C has a 3 pt and blade. I used a Prince 2 spool control and the 3 pt seems to work fine. The blade acts like the pumps sucking air or not getting oil. I had to cob the suction line from 2 pieces due to rust and the bushing at the intake on the pum...
- Sun Jan 07, 2007 6:50 pm
- Forum: Early model JD crawler technical support
- Topic: Thanks
- Replies: 0
- Views: 1767
Thanks
Whoever mentioned that fuel filter inside the inlet elbow of the carb- THANK YOU! My 1010 was having issues. Finally remembered that filter. What a difference. Now if I could just find a happy medium between too loose and too tight on my highly worn 40C tracks!
- Sat Jan 06, 2007 6:50 pm
- Forum: Show & Tell
- Topic: 1010CA Rebuild Project
- Replies: 9
- Views: 11472
- Tue May 09, 2006 6:05 am
- Forum: Early model JD crawler technical support
- Topic: Other maker equipment
- Replies: 1
- Views: 2837
Other maker equipment
Hey guys, I've seen reference to "other maker approved equipment" for the 40 series. Does anyone know of a web site showing the "catalog" of equipment? I tried bidding on a JD pub on Ebay that was listed as such, but it went way too high for me.