Search found 1874 matches
- Fri Jun 05, 2009 10:25 pm
- Forum: Early model JD crawler technical support
- Topic: 420 drive clutch
- Replies: 3
- Views: 4217
- Mon Jun 01, 2009 8:06 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 gas turns off uphill
- Replies: 8
- Views: 8158
- Mon May 25, 2009 4:56 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 2010 FUEL TANK SUPPORT
- Replies: 0
- Views: 1815
2010 FUEL TANK SUPPORT
Hi guys anyone have an extra fuel tank support? (under the tank near the rear)
- Tue May 12, 2009 8:38 pm
- Forum: Late model JD crawler technical support
- Topic: 450c lube issue
- Replies: 13
- Views: 16080
- Mon May 11, 2009 11:49 pm
- Forum: Early model JD crawler technical support
- Topic: stuck steering clutch 2010
- Replies: 3
- Views: 4227
took about a day to get the clutch out having to replace the fibers found some used $80 steels used $72 had a throw out bearing on the shelf had it for about 20 years having to buy center hub $50 had presure plate rebuilt $100 and brake band relined $75 and while i wait for parts i remounted the alt...
- Thu May 07, 2009 9:41 pm
- Forum: Early model JD crawler technical support
- Topic: timing gears
- Replies: 7
- Views: 5894
- Tue May 05, 2009 9:06 pm
- Forum: Early model JD crawler technical support
- Topic: timing gears
- Replies: 7
- Views: 5894
- Sat May 02, 2009 3:03 pm
- Forum: Early model JD crawler technical support
- Topic: stuck steering clutch 2010
- Replies: 3
- Views: 4227
well i broke down and started to repair my loader i got in dec. pulled the left clutch out today with some heat (all the pins were rusted in ) had to use a puller on the inner shaft it was not easy but could have been worse had to use a chipping hammer to get the dics and steels out. now the hard pa...
- Wed Apr 22, 2009 12:59 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 oil filter help,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
- Replies: 1
- Views: 2554
- Wed Apr 22, 2009 12:56 pm
- Forum: Early model JD crawler technical support
- Topic: My 2010 crawler
- Replies: 6
- Views: 6204
- Sat Apr 11, 2009 11:11 pm
- Forum: Early model JD crawler technical support
- Topic: Poll for what kind of crawler you have.
- Replies: 220
- Views: 198428
- Sat Apr 11, 2009 7:41 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 Engine blowing coolant
- Replies: 1
- Views: 2688
Nice looking machine as for the plate gasket if it is bad coolant will run on the out side of the block if the sleave seals where bad it will run coolant into the oil pan the only ways to push the coolant out of the rad. is a bad head gasket crack in a sleave which i dout or a cracked head or a stuc...
- Thu Apr 09, 2009 8:26 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 parts on craigslist
- Replies: 15
- Views: 14200
- Tue Apr 07, 2009 9:50 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 dozer starter
- Replies: 2
- Views: 3495
- Wed Apr 01, 2009 9:57 pm
- Forum: Show & Tell
- Topic: My "new to me" 2010
- Replies: 18
- Views: 17645