Search found 749 matches
- Thu Feb 18, 2016 6:13 pm
- Forum: Off-topic discussions
- Topic: Gasket Sealers/Makers
- Replies: 4
- Views: 5278
I use "The Right Stuff" from NAPA made by Permatex. Skip the whole gasket, it will fill a gap up to .090". We use it on all the OTR trucks and Ag equipment. Differential covers etc. We haven't had any call-backs and we have been using it for several years. It does use a small chaulking gun. I strong...
- Thu Feb 18, 2016 6:59 am
- Forum: Early model JD crawler technical support
- Topic: Converting 6 volt to 12 volt 1956 JD C40
- Replies: 10
- Views: 8689
- Wed Feb 17, 2016 1:20 pm
- Forum: Early model JD crawler technical support
- Topic: Converting 6 volt to 12 volt 1956 JD C40
- Replies: 10
- Views: 8689
- Mon Feb 15, 2016 1:55 pm
- Forum: Late model JD crawler technical support
- Topic: Water in transmission
- Replies: 11
- Views: 8943
OP is asking about the transmission, I believe. The clutch houses did not have a common sump in the straight and B series, as stated the steering clutches should be dry. The C series can be converted to a common sump, i think some of the late C's came from the factory with common sumps, correct me i...
- Sun Feb 07, 2016 8:22 am
- Forum: Early model JD crawler technical support
- Topic: Radiator mounting
- Replies: 2
- Views: 3298
Grind off the old rivet heads( or unscrew the screws), remove the old rubber mounts. Fit new mounts, placing the all the rivets in the same direction. You will need a proud 1/8 to 3/16" of the rivet sticking through the rubber mount. If they are longer you may have to trim the rivet back a bit with ...
- Wed Jan 27, 2016 6:12 pm
- Forum: Off-topic discussions
- Topic: got snow
- Replies: 43
- Views: 32396
- Thu Jan 21, 2016 6:33 pm
- Forum: Late model JD crawler technical support
- Topic: Advice for aftermarket undercarriage parts in Northwest?
- Replies: 7
- Views: 7344
- Wed Jan 20, 2016 6:07 pm
- Forum: Early model JD crawler technical support
- Topic: 1953 40c c/w blade and winch
- Replies: 3
- Views: 3940
- Wed Jan 13, 2016 3:00 pm
- Forum: Late model JD crawler technical support
- Topic: John Deere 550 Service Manual
- Replies: 1
- Views: 2175
- Tue Jan 12, 2016 8:38 am
- Forum: Late model JD crawler technical support
- Topic: needing a throttle cable for jd 450.
- Replies: 2
- Views: 2994
- Sun Jan 10, 2016 3:17 pm
- Forum: Late model JD crawler technical support
- Topic: Will a bucket interchange between a 350c and a 450c
- Replies: 4
- Views: 4290
Will a bucket interchange between a 350c and a 450c
I have found a 4 in 1 bucket for a 350C and wondered if it would fit my 450C. It would be simple to measure but i dont have a 350 and the bucket is some distance away. Thank you, Bruce
- Fri Jan 08, 2016 9:13 am
- Forum: Late model JD crawler technical support
- Topic: Advice wanted on purchase decision between JD 450 and 450 c.
- Replies: 18
- Views: 15624
If they were similar in condition it would be a no-brainer. But it sounds like the 450 is in better shape than the 450C. If you can store inside, want something to use now, and dont mind occasional dry clutch adjusments go with the 450. If you want a project to work on a slowly and improve the 450c ...
- Thu Jan 07, 2016 10:09 am
- Forum: Late model JD crawler technical support
- Topic: Reverser operation
- Replies: 32
- Views: 24879
Lavoy, Can you explain to me what you mean by shift speed can be adjusted, please. My first reverser was the gear-drive type on a 2nd phase 420C. Of course, you had to come to a complete stop with this reverser or face the consequences!! This made me develop the habit of stopping with direction chan...
- Wed Jan 06, 2016 7:01 am
- Forum: Late model JD crawler technical support
- Topic: Reverser operation
- Replies: 32
- Views: 24879
I have had a 450c track loader for about 15 years and have rebuilt a lot of it. Has this problem recently changed or has it been there since the beginning? How much experience have you had running a H-L-R trans? If i run my machine above 2,000 Rpm, direction changes can be violent. To be easier on m...
- Thu Dec 31, 2015 9:23 pm
- Forum: Late model JD crawler technical support
- Topic: 450c winch drive/spool valve rebuild
- Replies: 4
- Views: 5567