Search found 160 matches
- Sat Oct 26, 2019 3:55 pm
- Forum: Early model JD crawler technical support
- Topic: 440 ic rebuild
- Replies: 10
- Views: 6317
440 ic rebuild
Got my toy in shop, got engine out- think I need Tylenol !! Crank needs ground, flywheel needs resurfacing, needs block decked and cyls needs boring, one new rod, then new pistons and rebuild head. Haven’t touched finals or steering clutches yet. Ouch!! Has had a block repair by water pump mount. Be...
- Sat Oct 26, 2019 8:40 am
- Forum: Late model JD crawler technical support
- Topic: JD450C third head gasket This is getting old
- Replies: 168
- Views: 168500
Re: JD450C third head gasket This is getting old
Just a shot in the dark here— but if whoever installed liner originally , and wasn’t paying enough attention to assembly to cut rings on liner, just maybe also with the problems already posted here with the liner etc, I would be cleaning all head bolt holes in block, to make sure bolts are actually ...
- Thu Oct 24, 2019 9:16 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 engines
- Replies: 3
- Views: 2555
Re: JD 350 engines
Thanks for info. I came across a 350 ( with a loader) has frozen steering clutches, can get pretty cheap. Has been sitting for a few years. Didn’t know if I could use some parts for my 440ic, or repair it and sell. Sounds like repair and sell.
- Thu Oct 24, 2019 9:03 am
- Forum: Early model JD crawler technical support
- Topic: 440ic tach drive
- Replies: 2
- Views: 2209
Re: 440ic tach drive
Thanks. My parts order from you is getting bigger, and I haven’t even got it apart yet!! LOL.
- Thu Oct 24, 2019 8:54 am
- Forum: Early model JD crawler technical support
- Topic: 440ic tach drive
- Replies: 2
- Views: 2209
440ic tach drive
Does a 440 ic gas engine model have a tach? Mine has a plug assem over the hole by the distributor, but wondering if JD had a tach as an option? Would be neat to have as many options that were available when they were new.
- Thu Oct 24, 2019 8:49 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 engines
- Replies: 3
- Views: 2555
JD 350 engines
Do all JD 350 have Diesel engines ? If some have gas engines are they the same as 440ic gas engines? Are the engine clutches the same-gas and diesel?
- Fri Oct 11, 2019 5:13 pm
- Forum: Early model JD crawler technical support
- Topic: 440 ic tracks
- Replies: 4
- Views: 3605
Re: 440 ic tracks
Thanks Lavoy. Would you have that throttle stand?
- Fri Oct 11, 2019 9:03 am
- Forum: Early model JD crawler technical support
- Topic: 440 ic tracks
- Replies: 4
- Views: 3605
Re: 440 ic tracks
Forgot to mention, by serial # , this is a 1958 model, #-442172
Are the steering clutches same for these early units, same as later models, or is later ones better?
Are Diesel engine ones stronger? If newer models are better, can they be installed on my older unit? Will 350 tracks fit on a 440?
Are the steering clutches same for these early units, same as later models, or is later ones better?
Are Diesel engine ones stronger? If newer models are better, can they be installed on my older unit? Will 350 tracks fit on a 440?
- Fri Oct 11, 2019 8:26 am
- Forum: Early model JD crawler technical support
- Topic: 440 ic tracks
- Replies: 4
- Views: 3605
440 ic tracks
Have my 440ic up on blocks, noticed tracks seem to be worn in pins/bushings. Noticed that bushings are only as long as link, so if I removed any pin in track, the track would come apart( without pressing or cutting) is this normal? On a cat, the bushings( other than the main link) the bushings protr...
- Sun Sep 22, 2019 10:05 pm
- Forum: Early model JD crawler technical support
- Topic: New to this site
- Replies: 3
- Views: 2978
New to this site
Hi guys! New here so bare with me please! I am from central BC, Canada ( Quesnel) have just acquired a 440 ic, seems to be in nice shape( wear wise) has a 8A gearmatic, no reverser, 5 speed, canopy ( JD); outboard blade. Previous owner let it sit while waiting for new carb, installed it, started and...