Search found 44 matches

by Don2018
Fri Apr 27, 2018 6:33 pm
Forum: Late model JD crawler technical support
Topic: Jd 350 reverser oil
Replies: 13
Views: 9288

Re: Jd 350 reverser oil

I’m also confused about your manual telling you to use atf. Are you sure you’re looking in the correct manual?
Don
by Don2018
Fri Apr 27, 2018 6:33 pm
Forum: Late model JD crawler technical support
Topic: Jd 350 reverser oil
Replies: 13
Views: 9288

Re: Jd 350 reverser oil

I’m also confused about your manual telling you to use atf. Are you sure you’re looking in the correct manual?
by Don2018
Fri Apr 27, 2018 6:10 pm
Forum: Late model JD crawler technical support
Topic: Jd 350 reverser oil
Replies: 13
Views: 9288

Re: Jd 350 reverser oil

I have a 1966 350 with direction reverser. My service manual says to use JD type 303 which is the same fluid used in the transmission and hydraulic system. I believe 303 is now called jd Hygard but I use a quality hydraulic oil out of a 25 gallon drum in our shed.
by Don2018
Thu Apr 26, 2018 5:04 pm
Forum: Late model JD crawler technical support
Topic: JD 350
Replies: 18
Views: 11188

Re: JD 350

Maybe you guys can help me with a question on adjusting the steering on my 66 350 diesel. On page 140-5-2 of the Service manual, right side, last paragraph it says "Pull back on clutch control arm until throwout bearing just contacts the clutch fingers." When I look down in the hole, with the aid of...
by Don2018
Tue Apr 24, 2018 6:46 pm
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

Thanks for all the continued advice guys. I'm heading to Wisconsin tomorrow (probably) and will be able to pull the transmission cover off and see what's inside. I'll keep you posted. Also doing the reverser with filter, engine oil and radiator flush. Also going to pull off the air intake stack and ...
by Don2018
Tue Apr 24, 2018 9:28 am
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

I'm not near the machine for the next few days but I believe it is just the flat, 3 capscrew cover that's shown in the service manual page 120-15-1
by Don2018
Tue Apr 24, 2018 6:54 am
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

Ok now I understand. I'll know when the cover comes off and that'll probably create more questions for me. I'll get it all figured out by the time the winch is sold to someone else. Oh well, like I say, it's not really needed but would create a "cool" factor for our old loader. Right now we snake fi...
by Don2018
Tue Apr 24, 2018 6:25 am
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

Btown All fluids are to be changed in the next 2 weeks and I do plan on removing the trans rear cover and having a look see. It's too soon to give up! As I've mentioned earlier, I have the PTO Lever on my transmission. When I move it, it feels as if it's changing positions inside in a nice, firm, hi...
by Don2018
Mon Apr 23, 2018 7:18 pm
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

Well maybe someone Else will chime in and have the answer. Thanks for your help
by Don2018
Mon Apr 23, 2018 3:50 pm
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

Stan
Do you think then that all I have to do is slide in a winch shaft?
by Don2018
Mon Apr 23, 2018 2:29 pm
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

It's starting to seem as if just "sliding in" a winch shaft is not as easy as I would assume, even though I have the pto lever installed on my reverser optioned machine. Stan mentioned " a lot of work" to add a shaft. I'm not at all adverse to a lot of work but it may be beyond my limited time, know...
by Don2018
Mon Apr 23, 2018 11:12 am
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

Hey Lavoy you were correct also.
Thanks
by Don2018
Mon Apr 23, 2018 11:02 am
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

Bruce I believe you are correct. Your response prompted me to follow your lead and check the parts book. Even though the service manual clearly states that the manual winch is run off the machine PTO, when I reread other sections (specifically 160) I came to believe that there is a separate winch dr...
by Don2018
Mon Apr 23, 2018 9:02 am
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

Also, I have exchanged emails with the owner of the winch and he said it is driven by the PTO and says there is a shaft that sticks out of the back that slips over the PTO on the dozer. I suppose he could be wrong but it seems to me this winch is driven by the PTO.
by Don2018
Mon Apr 23, 2018 7:55 am
Forum: Early model JD crawler technical support
Topic: 1010/350 winch
Replies: 29
Views: 20455

Re: 1010/350 winch

Gentlemen I've received other photos of the winch from the owner and the control valve/actuating lever and accumulator valve are all present. This is a MANUAL 3310 winch, NOT the power winch and so according to page 180-5-1 (service manual) "Power flow to the manual winch passes from the tractor PTO...