Search found 45 matches
- Sun Aug 27, 2023 2:24 pm
- Forum: Late model JD crawler technical support
- Topic: 350 Fuel injector timing gear question
- Replies: 14
- Views: 9729
350 Fuel injector timing gear question
Hello all. I have a straight 350 SER# 070582T motor MU31F3152 Ser # 106008T.Was running fair but would quit after about 10-30 min of run time. A little smoke but not bad once warmed up. Tracked it down to fuel injection pump. Mouse turds in view window. So, I went thru procedures for removal with fl...
- Sat Jun 17, 2023 7:46 am
- Forum: Late model JD crawler technical support
- Topic: 1968 straight 350 electric fuel pump
- Replies: 1
- Views: 3872
1968 straight 350 electric fuel pump
Hello all ! I have a 1968 straight 350 and was considering changing fuel pump and possibly fuel filter to a more mordern after market . I dident see much on this . If there are any threads Somone knows maybe point the way . Any info on this would be greatly appreciated. Maybe best parts to use , pro...
- Sun Jul 24, 2022 7:56 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 fuel line
- Replies: 3
- Views: 2018
Re: JD 350 fuel line
Thanks for response! I do think you are correct rubber fuel lines will break down after some time Oil based around heat will dry them out and will be time to replace. So I'll bet if i asked you the question on a rebuild watt you use you would lean towards steal hose. A quick fix rubber hose would wo...
- Sun Jul 24, 2022 7:15 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 fuel line
- Replies: 3
- Views: 2018
JD 350 fuel line
Does anyone see a problem with changing fuel line supply and return to flexible rubber hose and eliminating steal rigged hose? anyone do this? watt should i look out for? Good produtcs to use?
- Sun Jul 24, 2022 7:11 am
- Forum: Late model JD crawler technical support
- Topic: 350c thrown track
- Replies: 14
- Views: 7581
Re: 350c thrown track
Had problem moving mine till i used blade to raise front end to take pressure off track tensioner . OOPS
- Sat Jun 11, 2022 2:13 pm
- Forum: Off-topic discussions
- Topic: Electrician Here !
- Replies: 1
- Views: 9459
Electrician Here !
Hello Im a master electrician near Boston ma. I am far from a heavy equipment mechanic but i do have some skills as many trade's men do. But watt i i do have lots of knowledge in the electrical field and am willing to share my knowledge as you here have shared yours. So if anyone needs advise about ...
- Sat Jun 11, 2022 2:05 pm
- Forum: Late model JD crawler technical support
- Topic: Track master pin
- Replies: 2
- Views: 1804
Re: Track master pin
One could only hope! Ill be in touch thanks !
- Sat Jun 11, 2022 8:13 am
- Forum: Late model JD crawler technical support
- Topic: Track master pin
- Replies: 2
- Views: 1804
Track master pin
Are most track pins generic? not as far as clip in type or press in type but as far as size or are they particular to each brand make of track? Watt i have is a press in type and is pretty bad off . Watts the best way to find a replacement ? Watt should i look for and were ? Maybe watt i am trying t...
- Wed Jun 08, 2022 11:35 am
- Forum: Late model JD crawler technical support
- Topic: Track tensioner
- Replies: 3
- Views: 2089
Re: Track tensioner
Well that makes sense . If that’s the bleed hole and bleed strew barring is gone makes for a easy fix . Anything I should watch out for in rebuilding these. Do you carry rebuild kits ?
- Tue Jun 07, 2022 1:06 pm
- Forum: Late model JD crawler technical support
- Topic: Track tensioner
- Replies: 3
- Views: 2089
Track tensioner
Pumping grease into track tensioner other day stopped moving and noticed up front underneath grease streaming out. Is there a fitting fo some sort or maybe rotted? Just weird how it was in circle stream indicating not cracked. If it is a hole from rot can these be welded? Its way up front underneath...
- Sun May 29, 2022 6:26 pm
- Forum: Late model JD crawler technical support
- Topic: Final Drive identification
- Replies: 2
- Views: 1763
Re: Final Drive identification
Got it thanks.
- Sun May 29, 2022 2:51 pm
- Forum: Late model JD crawler technical support
- Topic: Final Drive identification
- Replies: 2
- Views: 1763
Final Drive identification
On the john deer parts list, it shows 2-part numbers for some of the gaskets on final drive. How would i identify which one i have ? would i use the tractor SER# ? Doesn't seam to be even close . Is there number on final drive im not seeing ? Thanks in advance . JD 350 1968 Ser# 070582T motor MU31F3...
- Sun May 29, 2022 2:33 pm
- Forum: Late model JD crawler technical support
- Topic: jd 350 WINCH
- Replies: 4
- Views: 2967
Re: jd 350 WINCH
Ok great looking to bye .
- Sat May 28, 2022 4:41 pm
- Forum: Late model JD crawler technical support
- Topic: jd 350 WINCH
- Replies: 4
- Views: 2967
jd 350 WINCH
Hello, all Jd 350 up and running. Finishing up electrical started final drive rebuild paints coming along so at the point where I'm starting to look for a winch. Watt models will fit i think the one I'm after is 3015 any others i should keep my eye out for. Watts the average price range? anything i ...
- Fri Dec 31, 2021 8:52 am
- Forum: Late model JD crawler technical support
- Topic: 1968 350 Diesel starter question
- Replies: 14
- Views: 6046
Re: 1968 350 Diesel starter question
Just replace with the new type high tork half the size not bad price either . Go to starter shop bring the one you have they should know exactly watt you need if not let me know ill get you part number .