JDcrawlers Messageboard

Anyone have a model 24 scarifier? Need a couple of teeth and shanks. Have tried the local farm stores for matchs, and googled it and checked the different after market/ manufacturing sites, and none of their pics are close to mine. The ones with it are not original, and carry a casting # of X8226-cu...

If you want to save all the re-engineering, I have a 64 blade with all the goodies that I will part with. PM me.

Hey Lavoy. Ever get that rifle range started?

Has anyone come up with a hinged battery box door for an MC like the originals had. Have never seen one, but would be interested in a picture of one, or drawing etc. so I could make one.

Does anyone have some extra deluxe seat adjusters, part # AT10141T and AT10142T, for deluxe seat on 430C/440IC?

Wish you all would share. Its dry as a bone in east NC. Corn is shriveling. Some is tasseling at waist high! Ponds drying up. In the 90's and no rain forcast.

Can be converted to 3 pt. with correct rockshaft and associated adjusters and arms. McGrew has one on e-bay for $3500 without the top link!! Winch would have to go.

Does anyone have a electric schematic for wiring a BO electric start? Also, what is the correct starter switch? Mine has a push button, in not great shape, that goes to the solenoid. Thanks. Pat

Dikes still holding, or are you sandbagging?? Pat

Try johnnypopper.com or YT mag. But it would be more fun to buy a crawler!

Lavoy, I think Randy mentioned needing a few NOS Lindeman pads when I saw him at Polks, but I don't have his e-mail or phone #. Pat

thats a fine looking lindeman, Wyoming cat!! Looks like you got it some new shoes. Pat

Toplink topped out at $1725, and didn't make Reserve!!!! And you could hardly see it in the posted pictures.

Lavoy, Whats the matter? Are you tired of using those crawlers to push down the snow drifts so you can see the targets at the outdoor range?? Or just want to stay warm enough so the sights don't shake when its -10 degrees! Pat

Cody, the BO seat channel is made of 3" channel iron. About 30 inches long with about an 80 degree bend at about 10 inches up from the bottom. There are about 1 " center cuts on each end for adjustment. Would probably be easier to call Richy at McGrew Parts (866-521-9515) to see if they are parting ...