JDcrawlers Messageboard

The transmission and reverser are sold.
Thank you.
Brian

Thanks for the information everybody.
The plates measure within limits and are going back in.
Brian

Lavoy,
Thank you
Brian

Lavoy,

Do you have the spring cups (T 14504 T) in the steering clutches for a 420C?

What is the cost.

Thank you

Brian

Chuck,
Were the metalic "fiber" prone to moisture and expansion like the fiber ones?

If the thickness is correct, would they be ok to reinstall, or would it be better to put 'fiber' back in?

Thanks
Brian

Loader is sold. Thank you.
Brian

I'm rebuilding the clutches on my 420, when I removed the fiber and steel plates, the 'fiber' plates are semi metalic, not 'fiber' like I remember seeing on my MC.

Are these the correct fiber plates?

Thank you
Brian

I have been talking with Lavoy and he thinks the blade is a Northwestern Power Equipment blade. I would like 1500 or best offer... I have also decided to sell a # 63 manual 6 way blade off a 440 IC that I am parting out, asking 2200 or best offer... Also a 3 pt hitch off a 420C (no top link) 1000 or...

I removed a 6 way blade (not sure of the brand) off my 5 roller 420C. When the blade is raised up all the way, the bottom of the blade is almost 6 feet off the ground. 2 hyd cylinders for up/down, one hyd cylinder for tilt, there are wings on both sides of the blade. Blade is at least 6 feet wide. B...

I have a 420C that does not run, and I want to check the gages to see if they work.

Is there a way to check the amp and temp gages with a meter?

Thank you
Brian

I'm parting out a 440 IC. lots of good parts, some not so good...(that's why it is a part out) List of good parts: 1 sprocket transmission assy reverser assy center section rock guards 1 fender with battery box and hydraulic tank 1 spring tensioner 8 bottom rollers engine clutch housing nose (small ...

I'm really not setup to do the overhaul myself.
Just wondering, what is the average cost of parts for an overhaul?
If I go to a shop I'll definately ask for a warrantee periof that includes an extra day.

Thank's for the good advice.

Brian

I need to have an engine overhauled for a 440IC.

Any thoughts on price to have one overhauled VS buying one already overhauled?
I found one overhauled and ready to install for $2500.

Thank you
Brian

I bought a 440 IC and want to sell the 831 loader. It has a good serial number tag 2250. includes the hydraulic cylinders. Crawler is located near Spokane WA (250 miles away from me) and is still attached to the crawler. Send me a PM or email me (staceyjan@aol.com) if you are interested. pictures av...

Chuck,

Thanks for the reply. That is what I was afraid of.

Does anyone know what the average cost of a transmission rebuild would run (bearings and seals only)?

Brian