Search found 746 matches

by B Town
Sun Jul 19, 2020 6:01 am
Forum: Late model JD crawler technical support
Topic: 450c steering clutch fluid check
Replies: 6
Views: 4757

Re: 450c steering clutch fluid check

Yes, just missed 1977 by a few. The fill plug for the steering housings is also the full site; if the crawler is not a common sump. I don’t know the SN when common sumps were born; I’m not sure anyone knows. And there are some crawlers that have been converted to common sump. One way to confirm or d...
by B Town
Wed Jul 15, 2020 8:46 pm
Forum: Late model JD crawler technical support
Topic: 450c steering clutch fluid check
Replies: 6
Views: 4757

Re: 450c steering clutch fluid check

All C series have the fill plug(s) in the steering case. Crawlers converted to common sumps or born common sumps have thread locker on those plugs. The use of the plugs is abandoned, as the common sump fluid level is higher than those plugs. And the fluid level is followed by the dipstick.
by B Town
Wed Jul 15, 2020 7:21 pm
Forum: Late model JD crawler technical support
Topic: 450c steering clutch fluid check
Replies: 6
Views: 4757

Re: 450c steering clutch fluid check

Hello Jeffrey D, Do you know if your machine has a “common sump”? If it does, there is no need to check the individual R and L steering clutch housings. The trans, R and L sumps can be common in the “C” series. The fluid is checked with the dipstick under the operator seat. Are you certain this is a...
by B Town
Sat Jul 11, 2020 2:41 pm
Forum: Late model JD crawler technical support
Topic: pic of pto shaft
Replies: 7
Views: 5324

Re: pic of pto shaft

Hello renogang,

This is a link to the Deere parts book with the shaft and cast pieces. This is the best I can do .

https://partscatalog.deere.com/jdrc/sid ... gId/172102


Best wishes,

Bruce
by B Town
Mon Jul 06, 2020 9:46 am
Forum: Late model JD crawler technical support
Topic: 450c stump pan assembly
Replies: 4
Views: 3488

Re: 450c stump pan assembly

The plate with the large hole in it is likely the front attachment for a drawbar. https://partscatalog.deere.com/jdrc/sidebyside/equipment/73571/referrer/navigation/pgId/223797 https://partscatalog.deere.com/jdrc/sidebyside/equipment/73571/referrer/navigation/pgId/223808 Looks like a 1975, according...
by B Town
Sun Jul 05, 2020 7:32 pm
Forum: Late model JD crawler technical support
Topic: 450c stump pan assembly
Replies: 4
Views: 3488

Re: 450c stump pan assembly

Hello 8thnotch, Here is the JDeere parts catalog link/pictures. There is the bottom guard for the engine then there is a short or long rear bottom guard. I believe the short one works with the rear counter weight. I believe it actually bolts to the weight IIRC. https://partscatalog.deere.com/jdrc/si...
by B Town
Fri Jun 26, 2020 1:56 pm
Forum: Late model JD crawler technical support
Topic: JD 350b weights
Replies: 10
Views: 6495

Re: JD 350b weights

To address the traction issue, I would try loading with the bucket towards the rear of the trailer. Even with the heavier 4 in 1, I believe the center mass is towards the rear of the track loader.
by B Town
Fri Jun 26, 2020 11:17 am
Forum: Late model JD crawler technical support
Topic: JD 350b weights
Replies: 10
Views: 6495

Re: JD 350b weights

Is the machine loaded bucket forward or bucket to the back??
by B Town
Sat Jun 20, 2020 7:05 pm
Forum: Late model JD crawler technical support
Topic: JD 450C 3325 Winch issue
Replies: 11
Views: 7917

Re: JD 450C 3325 Winch issue

Thank you for the follow up
by B Town
Wed Jun 17, 2020 11:25 am
Forum: Late model JD crawler technical support
Topic: 450C brush screens
Replies: 1
Views: 2012

Re: 450C brush screens

Hello Sir, Forestry package or brush guards are in the parts. Here is a https://partscatalog.deere.com/jdrc/sidebyside/equipment/67823/referrer/navigation/pgId/224194 NLA - no longer available. Might get luck and find a ROPS in a breaker yard with a brush guard. I’m not aware of a secondary manufact...
by B Town
Tue Jun 16, 2020 5:58 pm
Forum: Late model JD crawler technical support
Topic: JD450B won’t steer
Replies: 11
Views: 6175

Re: JD450B won’t steer

According to Stan’s SN post in the FAQ section, you crawler is a 1971 B series (I initially mis-read your SN as 112,xxx). So dry clutches. Tear done a rebuild, sorry. Bruce
by B Town
Mon Jun 15, 2020 5:57 pm
Forum: Late model JD crawler technical support
Topic: JD 450C 3325 Winch issue
Replies: 11
Views: 7917

Re: JD 450C 3325 Winch issue

Hello Sir, Jim B has offered some very good advice. Looking under the rear of the crawler, up under the winch, can be pretty dirty. Clean this area well for visual access. There will be a internally splined coupler bxt the winch drive shaft and the winch input shaft. There should be a roll/spring pi...
by B Town
Sat Jun 06, 2020 6:59 pm
Forum: Late model JD crawler technical support
Topic: 450C, No drive on right side, no fluid pressure
Replies: 5
Views: 3720

Re: 450C, No drive on right side, no fluid pressure

The regulator is mounted in the engine compartment on the right side above the starter on the cowl wall. If there, it is likely not functioning, if not there, then you have found your problem.
by B Town
Fri May 29, 2020 4:59 pm
Forum: Late model JD crawler technical support
Topic: 350C Cross Country Travel
Replies: 9
Views: 8626

Re: 350C Cross Country Travel

Hello darrenrudolph83,

Your plan sounds like a great adventure. Wishing I was there to be involved.

Best regards, Bruce