Search found 353 matches

by Howard Yoder
Mon May 08, 2006 8:02 pm
Forum: Early model JD crawler technical support
Topic: New user and new 420C
Replies: 9
Views: 8421

seems like there was some body thinking about selling an arch on this board while back you might do a search and see if you can find it.
by Howard Yoder
Sat Apr 29, 2006 7:40 pm
Forum: Early model JD crawler technical support
Topic: 440icd Engine Removal
Replies: 23
Views: 19264

With or without either if that engine started in 3 turns after sitting that long there is nothing wrong with that engine. I think that would have to almost be a record for a 253
by Howard Yoder
Tue Apr 18, 2006 7:15 pm
Forum: Early model JD crawler technical support
Topic: 440icd Radiator
Replies: 7
Views: 8227

sorry i got busy today was in the room where it should be but forgot to look will check tomorrow.
by Howard Yoder
Mon Apr 17, 2006 7:05 pm
Forum: Early model JD crawler technical support
Topic: 440icd Radiator
Replies: 7
Views: 8227

If your still looking I might have a used one I will check tomorrow,
by Howard Yoder
Sun Apr 16, 2006 6:33 pm
Forum: Early model JD crawler technical support
Topic: 440icd Radiator
Replies: 7
Views: 8227

Most radiator shops can recore your old one or Lavoy might have a used one.
by Howard Yoder
Mon Apr 03, 2006 7:58 pm
Forum: Early model JD crawler technical support
Topic: New old dozer
Replies: 20
Views: 18012

since the guy was using this for logging does it happen to have forks on the front and are they original? If so could you take some pictures and post them? Thanks
by Howard Yoder
Wed Mar 29, 2006 7:47 pm
Forum: Early model JD crawler technical support
Topic: Spark plugs
Replies: 5
Views: 6443

I try to stay away from Champion but will use them if nothing else is available.
by Howard Yoder
Mon Mar 20, 2006 7:02 pm
Forum: Early model JD crawler technical support
Topic: jd 1010 dozer problem
Replies: 1
Views: 2613

does it move when it warms up and not move when it is cold? If so then it coulod very well be the reverser.
by Howard Yoder
Sun Mar 19, 2006 7:54 pm
Forum: Early model JD crawler technical support
Topic: 1960 440 Crawler Final Drive Installation
Replies: 4
Views: 5058

they seem to be plentifull on e-bay
by Howard Yoder
Sun Mar 19, 2006 7:52 pm
Forum: Early model JD crawler technical support
Topic: Two-Cylinder Mag.
Replies: 1
Views: 2744

Yes I enjoyed that artical. Had some good info.
by Howard Yoder
Tue Mar 14, 2006 6:23 pm
Forum: Early model JD crawler technical support
Topic: 1010 and 440ICD parts interchange
Replies: 14
Views: 14270

Lavoy may need to correct me here but I'm pretty sure the finals will not interchange unless it is a real early model but I still don't think they will. The undercarriage is the same.
by Howard Yoder
Sat Mar 11, 2006 7:32 pm
Forum: Early model JD crawler technical support
Topic: New to Forum, New to crawlers
Replies: 4
Views: 4789

Just another thing about safety I pulled a truck out that was stuck and had to pull it out backwards. Had a 20 ft. chain on it and it was loaded with logs some hung out the back of the truck a few feet. After I got the truck out the guy kept backing and the dozer was in low gear and I was howlering ...
by Howard Yoder
Fri Mar 10, 2006 7:28 pm
Forum: Early model JD crawler technical support
Topic: New to Forum, New to crawlers
Replies: 4
Views: 4789

The only thing you might have trouble with is pushing out a 6" tree. It will do it but it is acording to what type of soil and what kind of tree. You can dig around these trees if you have lot's of patience but you have to be carefull or you will tear up the dozer. As far as the rest of the chores i...
by Howard Yoder
Sun Mar 05, 2006 7:23 pm
Forum: Early model JD crawler technical support
Topic: Logging Arch for 1010 or 440
Replies: 2
Views: 3451

I have a 440 with one on it and there was someone on here a while back that was trying to sell one he was from Pa. I would like to find an original set of logging forks for mine if anybody runs across any let me know. Thanks
by Howard Yoder
Thu Mar 02, 2006 6:45 pm
Forum: Early model JD crawler technical support
Topic: Loading a dead crawler
Replies: 8
Views: 7513

If you have someone close with a tilt bed truck and winch on it check and see how much he will charge you I luck out one time and the guy didn't charge much at all but that has been a few years ago. Good Luck P.S. the grease between 2 piecies of wood works good just make sure it don't ge away from y...