JDcrawlers Messageboard

Did you disconnect and reconnect battery after a day or so, clear the codes. and see if the same ones come back.

However the one I was going to order, I would have to modify my ripper mount with eye (pin) inserts or bolts.

Yes, Email - leianclews@hltooth.com. Mine for my 450C would be around 250$ each with shipping. Haven't decided yet. I need 2 or three. My attachment has none.

only a couple of the final drive before and after. to busy to sit back and take pics of the whole process. I need help to upload with photos. Tried it the other day to the host site, but.

Looks a little rough, I was always one to judge the outside, inside will be the same. Depending on price. Parts are not cheap.

Installed rebuilt Final drive right side this weekend. Everything good and checks out . I have some helpful tips if anyone is going to tackle this. Hardest part was the track Pin.

Been about a month now. Rebuilt final drive, all shot to hell. 1700$ in parts and 200$ on some tools. Going to install it this Saturday. My brother hauled off our Case 485 for clutch work. He forgot we were going to install the drive. :x :x . Now have to do with with pullys and winch with a pipe ove...

Trying to load pictures.

I'm ready to put my final drive on 450C. Just overhauled it. The problem is your upper seal at pinon. if the seal is worn, it will bleed into final drive gear area. And yes your final drive will be filling up from wet clutches. I would pull off final drive. and over haul it, inspect bearings etc. al...

The answer was right in front me yesterday after i posted. The old Bearing sleeve. and using a 3 1/2" pipe extender. I thought the pipe would have worked but it was to large and would have pressured against the bearings and destroyed them. However, this weekend I will attempt the bearing install on ...

OK everyone, I have a press. before I jump at it, installing the large bearing on the axle shaft. wondering how those of you have done a bearing this size did this one. Been trying to get a pipe that would fit over the shaft down on the bearing without messing up the bearing. That size of pipe is ne...

Thanks, My manual did not say. But maybe I need to re read somewhere. Yes wet cluthches. I would assume it needs sealant.

This is for the 450C

almost ready to re attach the final drive to main frame. Do I need to use a sealant for final drive to main frame or is it metal to metal contact. The pinon shaft might leak ?