Search found 353 matches
- Fri Mar 27, 2015 10:05 am
- Forum: Early model JD crawler technical support
- Topic: 40C idle pulsing after warm up
- Replies: 5
- Views: 5269
- Tue Jan 20, 2015 10:21 am
- Forum: Show & Tell
- Topic: New to me 350C
- Replies: 35
- Views: 42836
- Sat Nov 29, 2014 8:33 am
- Forum: Show & Tell
- Topic: told the wife it isnt a dozer if its on wheels
- Replies: 3
- Views: 7292
- Fri Nov 28, 2014 2:26 pm
- Forum: Show & Tell
- Topic: told the wife it isnt a dozer if its on wheels
- Replies: 3
- Views: 7292
- Fri Nov 21, 2014 3:55 pm
- Forum: Show & Tell
- Topic: how to ? or how not to? unload a 450 loader
- Replies: 9
- Views: 13831
- Fri Oct 24, 2014 7:23 am
- Forum: Early model JD crawler technical support
- Topic: mc rails n pads
- Replies: 2
- Views: 3227
- Wed Oct 22, 2014 5:29 pm
- Forum: Early model JD crawler technical support
- Topic: mc rails n pads
- Replies: 2
- Views: 3227
mc rails n pads
have new pads on some rails that seem the pins and bushings are wore a little but have really good pins and bushings on another set that the pads are really sloppy so should I change the pads or will they just come loose on the other rails or should I just change the hole set of tracts rails and pad...
- Mon Oct 20, 2014 5:56 pm
- Forum: Early model JD crawler technical support
- Topic: MC Belt Pulley
- Replies: 2
- Views: 3167
- Sat Aug 30, 2014 5:51 am
- Forum: Early model JD crawler technical support
- Topic: 40c - Clutch Dragging?
- Replies: 12
- Views: 9291
- Sun Aug 17, 2014 9:00 pm
- Forum: Early model JD crawler technical support
- Topic: What set if tracks to put back on my 440?
- Replies: 26
- Views: 20535
You have to stay on your toes just when you get comfortable working on them something bites you in the ass just got done tearing mine back apart after putting in a tranny reverser and finals back on found out the splines were stripped in the ring gear so it had to come all apart again thought about ...
- Tue Jul 29, 2014 6:39 am
- Forum: Early model JD crawler technical support
- Topic: Clutch brake pedal
- Replies: 2
- Views: 3593
I'm bad about taking pictures but talking about stupid when I rebuilt the tranny a few years ago the ring n pinion where in really good shape so I left it alone now I have both finals on put a bar on to check out the adjustment on the brake n throw out bearing got the right side adjusted went to the...
- Fri Jul 11, 2014 3:20 pm
- Forum: Early model JD crawler technical support
- Topic: Clutch brake pedal
- Replies: 2
- Views: 3593
Clutch brake pedal
So was getting ready to bolt tranny to reverser and realized the brake pedal was stuck to the clutch pedal tried every thing to free it up spraying pb and others leaving it set over the weekend nothing worked forgot to try water finally put as much heat as I dared without getting the seal to hot kno...
- Sat Jul 05, 2014 7:36 am
- Forum: Early model JD crawler technical support
- Topic: 440 tranny
- Replies: 12
- Views: 9640
tried to pull just the trannyagain and couldn't get it over the hum so loosened the reverser and it allmost fell out the shaft going from reverser to engine clutch stayed in the clutch will have to open the reverser up and look in there when I get time but that wasn't good right now working on chang...
- Tue Jul 01, 2014 12:46 pm
- Forum: Early model JD crawler technical support
- Topic: 440 tranny
- Replies: 12
- Views: 9640
- Tue Jul 01, 2014 12:41 pm
- Forum: Early model JD crawler technical support
- Topic: 440 tranny
- Replies: 12
- Views: 9640
I think I will try to unbolt the reverser and pull it with the tranny. I think something broke in the reverser so maybe it isn't letting the shaft pull out like it should and yes I did remember to block the front. Fortunaly I have another reverser that is rebuilt but unfortunally it is in a small ho...