Search found 363 matches
- Wed Sep 16, 2020 6:21 am
- Forum: Late model JD crawler technical support
- Topic: 450D Broken Bolts in Mounting Frame and Cross Bar
- Replies: 4
- Views: 3206
Re: 450D Broken Bolts in Mounting Frame and Cross Bar
I would use a rose bud torch to completly heat red let cool on its own might have enough out to turn out with pipe wrench or weld nuts on after heating
- Tue Sep 08, 2020 11:16 am
- Forum: Late model JD crawler technical support
- Topic: 450C rollers
- Replies: 12
- Views: 8217
Re: 450C rollers
Good !!
- Mon Sep 07, 2020 10:07 am
- Forum: Late model JD crawler technical support
- Topic: 450C rollers
- Replies: 12
- Views: 8217
Re: 450C rollers
have two used lower and one new berco support roller in Armada MI
JIM
JIM
- Wed Sep 02, 2020 4:31 pm
- Forum: Late model JD crawler technical support
- Topic: Model Identifacation and part number for cylinder seal kit
- Replies: 5
- Views: 3607
Re: Model Identifacation and part number for cylinder seal kit
when I do the cylinders on my john deere equipment i replace what is needed to stop the leak which is the rod packing seals wiper seal packing gland o- ring and backup usually buy direct from JD 75.00 if you buy the seat kit from deere 231.00 just what I have done in the past and works for me and sa...
- Tue Aug 18, 2020 6:14 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 boom cylinder overhaul
- Replies: 1
- Views: 2412
Re: JD350 boom cylinder overhaul
sounds like a plan to me, if you have an engine hoist and a good ratchet come along that would helpfull have done many still attached to machine makes a good vise just Jd seals are not real pricy for that old stuff
JIM
JIM
- Tue Aug 18, 2020 4:20 am
- Forum: Late model JD crawler technical support
- Topic: 450B engine guard
- Replies: 3
- Views: 3127
Re: 450B engine guard
they are out there I bought a set for my 450C can not remember were google 450 engine guards
JIM
JIM
- Mon Aug 10, 2020 5:13 am
- Forum: Late model JD crawler technical support
- Topic: 450c oil leaks
- Replies: 12
- Views: 9714
Re: 450c oil leaks
easy way to work on a dozer or loader engine is to completely remove dozer or loader frame you will most likely find some thing else needs work some on those also presently doing an in frame over haul on 3 cylinder JD 302 with loader removed JIM
- Tue Jul 28, 2020 3:27 am
- Forum: Late model JD crawler technical support
- Topic: 450B problem
- Replies: 40
- Views: 25148
Re: 450B problem
most reasonable pricing I would go with them shop in my area is over 600.00
JIM
JIM
- Wed Jul 22, 2020 2:57 am
- Forum: Late model JD crawler technical support
- Topic: Radiator and trans oil cooler
- Replies: 2
- Views: 2904
Re: Radiator and trans oil cooler
not sure were you are located but Detroit Radiator has locations all over the US i have used most reasonable pricing recore is the best way to go
JIM
JIM
- Fri Jul 17, 2020 5:29 pm
- Forum: Late model JD crawler technical support
- Topic: Dumped my hydraulic fluid, am I damaging my pump?
- Replies: 16
- Views: 11551
Re: Dumped my hydraulic fluid, am I damaging my pump?
I have a 450 Dozer had trouble with trans cooler lines rubber hoses got original from mother deere and it was really thick and to heavy to get on the steel lines so I got return hydraulic from a hydraulic repair shop and was easier to work with
JIM
JIM
- Sat Jun 27, 2020 2:29 am
- Forum: Late model JD crawler technical support
- Topic: compression test JD 3 cyl
- Replies: 2
- Views: 2513
Re: compression test JD 3 cyl
found one at Opentip.com gauge and adapter 108.00
- Fri Jun 26, 2020 3:53 am
- Forum: Late model JD crawler technical support
- Topic: compression test JD 3 cyl
- Replies: 2
- Views: 2513
compression test JD 3 cyl
looking for compressor tester for a JD 350 dozer
JIM
JIM
- Sun May 31, 2020 3:40 am
- Forum: Late model JD crawler technical support
- Topic: DIP STICK SWITCHED?
- Replies: 1
- Views: 1889
Re: DIP STICK SWITCHED?
the tube one goes in the reverser
JIM
JIM
- Sat May 09, 2020 2:55 am
- Forum: Late model JD crawler technical support
- Topic: Reverser leaking
- Replies: 1
- Views: 2016
Re: Reverser leaking
If you have trouble in reverser and transmission should remove from rear you can not take trans apart with finals on good luck systems are seperate JIM
- Wed Apr 29, 2020 4:13 am
- Forum: Late model JD crawler technical support
- Topic: 350b loader - Radiator "without reverser"
- Replies: 10
- Views: 6314
Re: 350b loader - Radiator "without reverser"
If you have usable tanks why not re core I have used Detroit Radiator many times they are all over the US and very reasonable. they are a manufacturing facility JIM