JDcrawlers Messageboard

That is what a diesel fired heater is ours are made by ESBAR I think it is the smallest coolant heater they make .If you go to your FORD dealer they should have a kit for liquid loop heat system .We have one on each of the two new 6.4 liter trucks for engine heating the drainage plows .Our local sma...

It is a mid year 1975 build .Digitup.

Check the converter seal then when in there .Digitup.

We install a in block on the backhoes on our JCBs ,CAT and the DEEREs in the center frost plug between second and third cylinders .These units are only forty watt but do a more efficient job than 100 watt units plumbed into lower hose or circulation hose units they lose to much heat just getting the...

I need at least 5 numbers in a row without a letter in there .And what model is it as that is also important .say I was going to find someone to give the s/n book to.Anybody want to post serial #s from this book Get in touch with me it needs to be done and I have very little time to do it . Digitup.

Some of those little 350s could be a real pain to start I had one and everyone told me no way they are just great I cured mine by taking it to an auction [You didn't want to hear that did you ] but I always figured that 350s were not my machines any way .I bought several since and these little bugge...

I think the problem was that John Deere had out powered that drive system .The early 550s had the same drives and bull gears as a 450E I Think don't take my word for this but It is as close as s#$t to swearing to the ratio and gear width in both any way.I never had problems with finding parts my gea...

Check your trany temp or pressure gage if it fluctuates or pressure goes away then it could be seals or pump in trany .The 550s and 555s were bad for taking the bull gear bearing out usually brought on by torquing into something and turning then letting the leaver slam back the quick snap back into ...

Put the 4speed into neutral to do your job .You can still use the steering clutches to fine tune your trailer entrance over the tail if you need to .The power shift is in front of the 4speed so it wont turn if the 4 speed collar shift is left between gears someplace .Digitup.

Looks like it should lift .You know that two minutes after you get it refined king of procrastinators will call with your other three point unit removed !! Digitup.

It looks like this was one of those years that Deere fazed out one model and went into the next mixing serial#s and models as the 350B-started at 29508 in1995 and the 350Cs started in 1995 with serial# 29600 mixed with the former till 1996 starting at -240367 both the 350Bs and the 450Bs mixed at th...

Deere will paint your dozer or grader or even your excavator green and ag yellow for no extra charge .We have a couple of townships up here that got green graders for years now and they would take a sticker kit for a 7700 combine and cut off a 0and put that decal on the 770 grader some years ago .I ...

And a spot to park the bike I doubt it !!She is still upset about a new drainage plow .It has been working so I can throw my hat in the house and she hasn't said any thing till little brother announced the cost to her at Christmas . I nearly got committed then .I won't need a tax wright off for a ye...

I can't even think of what I have bought in the last year -Two Cleattracks a John Deere 550B and two D5Gxl Cats but the last ones are like swearing on here. Digitup .

Someone stayed up nights thinking up that design up though .I would like to see how smooth that engine realty runs.I thought you would still have some up and down movement with the piston throw ? Wonder if they would send one over for us to try out .In the spring of course .I am wondering about the ...